how to remove the air filter housing

Thread view:

Enable EMail Alerts

Start New Thread

Thread rating:

Mike Muzaini - 21 Mar 2005 21:30 GMT

Hi all,
I need to change the battery on a 98b Intrepid, I have removed the
negative post connection, the air filter, but how do I take out the
air filter housing, Hopefully someone will guid me before the sun goes
down.

Thanks
Mike
1st message, and haven't browsed the group messages yet. but I'll do
in near future

Reply to this Message

maxpower - 22 Mar 2005 00:22 GMT

> Hi all,
> I need to change the battery on a 98b Intrepid, I have removed the
[quoted text clipped - 6 lines]
> 1st message, and haven't browsed the group messages yet. but I'll do
> in near future

The battery comes out the side access panel at the right fron wheel well.

1.. Turn the steering wheel all the way to the right.
2.. Verify that the ignition switch and all accessories are OFF.
3.. Disconnect and isolate the negative battery cable remote terminal from
the remote battery post Negative Battery Cable Remote Terminal
4.. Remove air cleaner housing. Remove the fastener at the air cleaner to
body, air intake snorkel and lift housing from its grommet
5.. Remove battery splash shield.
6.. Remove two short bolts to battery hold down.
7.. Slide battery rearward to disconnect the negative and positive battery
terminals from battery.
8.. Slide battery toward rear of vehicle and lift out through wheel well
opening.
9.. Remove battery from vehicle.

Glenn Beasley
Chrysler Tech

Reply to this Message