How to remove 300M door panel (to access window motor) ?

Thread view:

Enable EMail Alerts

Start New Thread

Thread rating:

MoPar Man - 10 Apr 2005 02:04 GMT

Seems my front-passenger window motor is dead. No response from both
the driver's window switch nor the passenger's switch. All other
windows work. No indication that the window motors are individually
fused.

Do I need special tools to remove the door panel?

Is the motor integrated with the linkage, or can it be removed while
keeping the linkage in place?

Reply to this Message

maxpower - 10 Apr 2005 11:23 GMT

> Seems my front-passenger window motor is dead. No response from both
> the driver's window switch nor the passenger's switch. All other
[quoted text clipped - 5 lines]
> Is the motor integrated with the linkage, or can it be removed while
> keeping the linkage in place?

Not individually fused, but before you remove it, while the engine is
running and the door open, slam the door a few times as you are holding the
window switch in the door position, most of the times what happens is the
window gets stuck in the gasket at the top, when the window does go down,
clean the top of the gasket and the windows on all 4 doors.

don't be afraid to slam the door very hard either

Glenn Beasley
Chrysler Tech

Reply to this Message

Sharkman@comcast.net - 10 Apr 2005 13:24 GMT

What do you use to clean the gasket?
thanks
sharkman

>> Seems my front-passenger window motor is dead. No response from both
>> the driver's window switch nor the passenger's switch. All other
[quoted text clipped - 17 lines]
> Glenn Beasley
> Chrysler Tech

Reply to this Message

maxpower - 10 Apr 2005 20:40 GMT

> What do you use to clean the gasket?
> thanks
[quoted text clipped - 21 lines]
> > Glenn Beasley
> > Chrysler Tech

Any kind of house hold cleaner including windex

Reply to this Message

Sharkman@comcast.net - 11 Apr 2005 13:16 GMT

Thanks, I'll try that.. I hope it will eliminate the sticking problem..

Signature

Shafer - Professional Web Surfer and President of the PWSAA; Official
BB and anywhere else pointgiver and CEO HRWB.

>> What do you use to clean the gasket?
>> thanks
[quoted text clipped - 25 lines]
>>
> Any kind of house hold cleaner including windex

Reply to this Message

mic canic - 10 Apr 2005 14:14 GMT

there is screws at the bottom of the door panel and the speaker cover pops off
then u can see 3 screws that hold the panal on then there is one in the grab
cup and then 2 in the front part of the panel and one behind the door
handleunder a round cover.once all the screws are out, pull on the panel and it
will pop off be carefull of the door handle doesn't break by pulling to far
out from the door

> > Seems my front-passenger window motor is dead. No response from both
> > the driver's window switch nor the passenger's switch. All other
[quoted text clipped - 16 lines]
> Glenn Beasley
> Chrysler Tech

Reply to this Message