Sebring MTC problem

Thread view:

Enable EMail Alerts

Start New Thread

Thread rating:

Spam Hater - 23 Mar 2006 09:57 GMT

Suddenly my wife's '91 Sebring has a problem with the Manual Temperature
Control.
-Only the high speed blower setting works.
-The vent selection doesn't work.

All fuses are OK.
Nothing else electrical seems in trouble.
My next step seems to pull that part of the panel off.

Ideas welcome.

Reply to this Message

maxpower - 23 Mar 2006 10:17 GMT

> Suddenly my wife's '91 Sebring has a problem with the Manual Temperature
> Control.
[quoted text clipped - 6 lines]
>
> Ideas welcome.

Don't pull the panel off, replace the blower resistor, its located under the
glove box mounted into the A/C Housing.

Glenn Beasley
Chrysler Tech

Reply to this Message

philthy - 25 Mar 2006 19:41 GMT

a 91 sebring????

> --
> > Suddenly my wife's '91 Sebring has a problem with the Manual Temperature
[quoted text clipped - 13 lines]
> Glenn Beasley
> Chrysler Tech

Reply to this Message

Spam Hater - 27 Mar 2006 00:49 GMT

> > > Suddenly my wife's '91 Sebring has a problem with the Manual Temperature
> > > Control.
[quoted text clipped - 12 lines]
> > Glenn Beasley
> > Chrysler Tech

> a 91 sebring????
>
> > --

Sorry it's a 2001, the yrs are going too fast! <:)
Hopefully Glenn's suggestion will do it. Certainly not where I'd have
looked. I'm wondering if I kicked something there when a passenger; the
toe room is a bit cramped for longer legged big foot passengers.
If that's it wife will be extremely happy.

Reply to this Message

maxpower - 27 Mar 2006 02:16 GMT

> > > > Suddenly my wife's '91 Sebring has a problem with the Manual Temperature
> > > > Control.
[quoted text clipped - 22 lines]
> toe room is a bit cramped for longer legged big foot passengers.
> If that's it wife will be extremely happy.

I knew what you meant, they didn't make a Sebring back then. replace the
resistor as I stated before

Signature

Glenn Beasley
Chrysler Tech

Reply to this Message