 |
 | Home | Contact Us | FAQ | Search & Site Map | Link to Us |
 | Sign In | Join | Other 45 Sites in Network |
Car Forum / Chrysler Cars / May 200695 LHS
My girls car is trippin and the check engine light came on so I did diagnostic code check and the code I came up with is 12 which is the start of codes and the 54 which I dont know what it is, then 55 which is the end of the codes.. My question is What code is 54?? everytime the CEL comes on the car cuts-off!!!!!! > My girls car is trippin and the check engine light came on so I did > diagnostic code check and the code I came up with is 12 which is the start of > codes and the 54 which I dont know what it is, then 55 which is the end of > the codes.. My question is What code is 54?? everytime the CEL comes on the > car cuts-off!!!!!! No camshaft signal during engine cranking. Ken >> My girls car is trippin and the check engine light came on so I did >> diagnostic code check and the code I came up with is 12 which is the start of [quoted text clipped - 5 lines] > >Ken Ok so what do I need todo to fix that? Change the cam sensor or is that the PCM that causes that?? >>>My girls car is trippin and the check engine light came on so I did >>>diagnostic code check and the code I came up with is 12 which is the start of [quoted text clipped - 8 lines] > Ok so what do I need todo to fix that? Change the cam sensor or is that the > PCM that causes that?? Hi... Ooops, not a mechanic, just told you what the code was. Hopefully the mechanics here will tell you what to do next :) However, if you want to, I think it's safe for you to make sure the connection is good... perhaps unplug it and plug it in again a time or two. Don't remove it from the engine. If she has the 3.5 engine you can find it real easy. Standing in front of the car, look at the thermostat housing. About 3 or 4 inches to the right of that there's a device that "sticks into" the (driver's side) cam housing. Take care. Ken >> My girls car is trippin and the check engine light came on so I did >> diagnostic code check and the code I came up with is 12 which is the start of [quoted text clipped - 5 lines] > >Ken Ok so what do I need todo to fix that? Change the cam sensor or is that the PCM that causes that?? |
Reply to this Message |
 Sign In
 Join
 My Latest Posts My Monitored Threads My Blog My Photo Gallery My Profile My Homepage Start New Thread Enable EMail Alerts Rate this Thread
|
©2008 Advenet LLC Privacy Policy - Terms of Use
This website includes both content owned or controlled by Advenet as well as content owned or controlled by third parties.