dead sundance and duster after going over a bump

Thread view:

Enable EMail Alerts

Start New Thread

Thread rating:

mr.snakeman - 27 Dec 2006 14:51 GMT

I have a 1993 duster and a 1993 sundance (the parts car I bought to
hopefully fix the duster). Both 2.5 litre non-turbo.They both died
after going over a bump. No computer codes (as in it does not display
ANY flashes of the codes!), engine turns over great. I bought the
sundance for the computer, coil, distributer etc. IT IS NONE OF THESE!
It's also not the relay set under the hood. Anyone know what the
problem is? After a big bump- instant shut off never to re-start again!
fusible link??? help!!!

Reply to this Message

aarcuda69062 - 27 Dec 2006 15:33 GMT

In article
<1167231091.350012.247900@73g2000cwn.googlegroups.com>,

> I have a 1993 duster and a 1993 sundance (the parts car I bought to
> hopefully fix the duster). Both 2.5 litre non-turbo.They both died
[quoted text clipped - 4 lines]
> problem is? After a big bump- instant shut off never to re-start again!
> fusible link??? help!!!

If you can not get any flash codes by cycling the ignition key
three times, the next logical step would be to verify 12 volt
battery feed, 12 volt ignition feed and grounds at the SBEC.

Reply to this Message