2.5l Turbo Timing Positioning

Thread view:

Enable EMail Alerts

Start New Thread

Thread rating:

PhilipLowran@gmail.com - 10 Sep 2007 17:46 GMT

Hi Everyone
I have a Dodge Daytona with the 2.5 Turbo SOHC.
I need to set the timing I just did a Head gasket and my chilton
manual isnt showing me the positioning of the crank shaft. I know the
middle 2 sprockets have arrows that have to point at each other and
the cam shaft has a oval cut out that supposed to be pointing up.
Can someone tell me the positioning or maybe find a picture online to
show me this? for I have failed.
Philip

Reply to this Message

maxpower - 10 Sep 2007 20:14 GMT

> Hi Everyone
> I have a Dodge Daytona with the 2.5 Turbo SOHC.
[quoted text clipped - 5 lines]
> show me this? for I have failed.
> Philip

Phil, when you set the timing belt, the intermediate shaft (that drives the
distributor) has a mark such as this - that is supposed to line up with the
other mark on the crankshaft (-) the cam has 2 arrows that are supposed to
line up with the camshaft bearing caps (straight across) making sure the
hole in the cam sprocket is straight up. If you line the cam marks with the
hole down.......it will be 180 degrees out.

Glenn Beasley
Chrysler Tech

Reply to this Message