 |
 | Home | Contact Us | FAQ | Search & Site Map | Link to Us |
 | Sign In | Join | Other 45 Sites in Network |
Car Forum / Chrysler Cars / December 2007PT Cruiser Bellcrank replacement.
The bellcrank in the rear suspension of our 2001 badly needs replacement. It should be easy if I could get the watts links ball-ends loose from the bellcrank. I've tried a small gear puller (and some hammering) on the lower end without any success. I suspect the stud may be tapered and should pop loose -- but it doesn't. Any suggestions or tricks ? Jim -- Message posted using http://www.talkaboutautos.com/group/rec.autos.makers.chrysler/ More information at http://www.talkaboutautos.com/faq.html tierod end pickle fork works good > The bellcrank in the rear suspension of our 2001 badly needs replacement. > It should be easy if I could get the watts links ball-ends loose from the [quoted text clipped - 5 lines] > Message posted using http://www.talkaboutautos.com/group/rec.autos.makers.chrysler/ > More information at http://www.talkaboutautos.com/faq.html A puller in combination with hammering on the bellcrank worked and didn't damage the link ends. -- Message posted using http://www.talkaboutautos.com/group/rec.autos.makers.chrysler/ More information at http://www.talkaboutautos.com/faq.html |
Reply to this Message |
 Sign In
 Join
 My Latest Posts My Monitored Threads My Blog My Photo Gallery My Profile My Homepage Start New Thread Enable EMail Alerts Rate this Thread
|
©2008 Advenet LLC Privacy Policy - Terms of Use
This website includes both content owned or controlled by Advenet as well as content owned or controlled by third parties.