> I need a wire harness for the front turn signal/emergency/side marker
> for a 1999 Chrysler T&C Limited. The part number on the (approx. 30")
> cable is 4707837AA 17778C.
>
> Can anyone please point me to a source other than the dealer?
Junk yard?
Bill Putney
(To reply by e-mail, replace the last letter of the alphabet in my
address with the letter 'x')
> I need a wire harness for the front turn signal/emergency/side marker
> for a 1999 Chrysler T&C Limited. The part number on the (approx. 30")
> cable is 4707837AA 17778C.
>
> Can anyone please point me to a source other than the dealer?
Do you need a harness or just the connector???
Glenn Beasley
Chrysler Tech
Piperson - 06 Jul 2008 22:06 GMT
Actually, the car side connector is needed. 2 of the 3 wire broke
and/or pulled out of the current one. The plug end is okay except for a
burnt side maker socket. I can live with out that. I am told that
soldering these wires is a pain due to an oxide coating???
>> I need a wire harness for the front turn signal/emergency/side marker
>> for a 1999 Chrysler T&C Limited. The part number on the (approx. 30")
[quoted text clipped - 6 lines]
> Glenn Beasley
> Chrysler Tech
Piperson - 08 Jul 2008 04:08 GMT
BTW. Another label on the bulb end of the cable indicates
NS JPR PARK/TURN
110722
Assembled in Mexico
There is no label on the car-end connector.
>> I need a wire harness for the front turn signal/emergency/side marker
>> for a 1999 Chrysler T&C Limited. The part number on the (approx. 30")
[quoted text clipped - 6 lines]
> Glenn Beasley
> Chrysler Tech