 |
 | Home | Contact Us | FAQ | Search & Site Map | Link to Us |
 | Sign In | Join | Other 45 Sites in Network |
Car Forum / Citroen Cars / February 2005ZX asymetric pad wear on nearside wheel
Last time I replaced the pads on my ZX I noticed that the nearside pair of pads had worn out at different rates, the pad on the outside edge of the disc were almost gone and the inner pad had a couple of mm of meat left. I've just had the wheel off and again the outside pad is around 2mm thinner than the inner one. The disc appears fine and there is no play in the caliper. Any suggestions on this one? Regards, Jason. --- Replace nntp with my name to reply. N0 5pAm H3r3: Include this tagline to pass my spam filter. > Last time I replaced the pads on my ZX I noticed that the nearside > pair of pads had worn out at different rates, the pad on the outside [quoted text clipped - 6 lines] > > Any suggestions on this one? Perhaps the outer pads pick up more dust from the edge of the road, and so wear out slightly quicker?  Signature-- ^^^^^^^^^^ -- Whiskers -- ~~~~~~~~~~ > Last time I replaced the pads on my ZX I noticed that the nearside > pair of pads had worn out at different rates, the pad on the outside [quoted text clipped - 9 lines] > Regards, > Jason. Caliper slides may be seizing. Pop the rubber boots off, give the slides a good clean and grease.
|
Reply to this Message |
 Sign In
 Join
 My Latest Posts My Monitored Threads My Blog My Photo Gallery My Profile My Homepage Start New Thread Enable EMail Alerts Rate this Thread
|
©2008 Advenet LLC Privacy Policy - Terms of Use
This website includes both content owned or controlled by Advenet as well as content owned or controlled by third parties.