Citroen XM - how to set timing ??

Thread view:

Enable EMail Alerts

Start New Thread

Thread rating:

GRZEGORZ - 26 May 2005 10:31 GMT

I have a 1991 Citroen XM 2,1d
i was changin a fuel pump and my timing got mesd up
thera are some markings on some of the weels, but I don't have a servising
book, and no idea how to set it
Please help me out

--

- - - -

Grzechu Majeski
Citroen XM 2,1D 1991 (Poland)

Reply to this Message

usenet@isbd.co.uk - 26 May 2005 13:29 GMT

> I have a 1991 Citroen XM 2,1d
> i was changin a fuel pump and my timing got mesd up
> thera are some markings on some of the weels, but I don't have a servising
> book, and no idea how to set it
> Please help me out

I don't know the answer off the top of my head but I have some manuals
at home that will probably tell you. E-Maill me to remind me (address
is valid).

Alterntively join the XM mailing list at Yahoo Groups
(XM-L@yahoogroups.com) and I'm sure lots of people there will be able
to help.

Signature

Chris Green

Reply to this Message

2Rowdy - 26 May 2005 19:19 GMT

Message i.d.:<news:d7451j$d29$1@news.onet.pl>,
by author GRZEGORZ aka <majeski.grzegorz@op.pl> inspired me,

> I have a 1991 Citroen XM 2,1d
> i was changin a fuel pump and my timing got mesd up
> thera are some markings on some of the weels, but I don't have a
> servising book, and no idea how to set it
> Please help me out

With the 93 version, start the engine and stand stil. Then you should
be able to set the clock.

Signature

d:Johan; Certifiable me
Seasons Wishes at http://www.aacit.net/aac.gif
[sig is lost, please use Google to find it]

Reply to this Message

2Rowdy - 27 May 2005 15:50 GMT

Message i.d.:<news:38fc3aae4c8b53ad5f3b37e6347a257d@nntp.aacit.net>,
by author 2Rowdy aka <harry131313@gmail.com> inspired me,

> Message i.d.:<news:d7451j$d29$1@news.onet.pl>,
> by author GRZEGORZ aka <majeski.grzegorz@op.pl> inspired me,
[quoted text clipped - 6 lines]
> With the 93 version, start the engine and stand stil. Then you
> should be able to set the clock.

Just realized how stupid my reply was, sorry.

Signature

d:Johan; Certifiable me
Seasons Wishes at http://www.aacit.net/aac.gif
By replying to this message you agree to the regulations written
on the back of this posting.

Reply to this Message

Reboot - 27 May 2005 12:02 GMT

You peg up the flywheel at top dead & bolt up cam & injection pulleys.

You can also remove the pump leaving the pulley & belt in place, but care
must be taken when realigning the key way in
the injection pump sprocket.

I have a timing belt manual, if you would like me to email you a scan of
these pages, let me know.

regards...

>I have a 1991 Citroen XM 2,1d
> i was changin a fuel pump and my timing got mesd up
[quoted text clipped - 8 lines]
> Grzechu Majeski
> Citroen XM 2,1D 1991 (Poland)

Reply to this Message