Home | Contact Us | FAQ | Search & Site Map | Link to Us
Sign In | Join | Other 45 Sites in Network
HomeAnnouncements
Discussion Groups
By Brand
BMWChevroletDodgeFordGMHondaLexusMercedes-BenzNissanPeugeotToyotaVolkswagenOther Brands
By Topic
4x4 CarsRVsDrivingMaintenance & RepairCar AudioCollectible Cars
Country Specific
Australian ForumsUK Forums
ArticlesAuto InsuranceBuyingCars & TechnologyMaintenanceMiscellaneousSafety
DMV Resources
Related Topics
MotorcyclesBoatsMore Topics ...

Car Forum / Dodge / Dodge Trucks / August 2005

Tip: Looking for answers? Try searching our database.

2000 Caravan - Instrument Cluster Failure

Thread view: 
Enable EMail Alerts  Start New Thread
Thread rating: 
yuck.fou@sympatico.ca - 30 Jul 2005 04:58 GMT
HELP!

I recently had a complete primary instrument cluster failure. The
speedometer, fuel, temperature, digital odometer and digital shift
indicator all stopped working....it does come back
sporadically...usually lasting for a several seconds (enough to glance
at the fuel guage!) then goes out again.

Secondary instruments all work including the warning panel above the
primary cluster.  'Check Engine Light' is also illuminated....vehicle
running fine.....might this indicate the cluster problem??

Fuses look good.  I even removed (for about twenty minutes or so) the
'IOD' fuse from the fuse box under the hood....hoping this might
clear any computer/communication glitches...unsuccessful.

Any help/experiences appreciated.  Thanks!  SW
Coasty - 30 Jul 2005 11:58 GMT
> HELP!
>
[quoted text clipped - 13 lines]
>
> Any help/experiences appreciated.  Thanks!  SW

The same thing happened about 4 years ago to my wife's 94 Shadow.  I removed
the instrument cluster it was one unit.  There is a female plastic plug that
the cluster plugs into.  Two things were happening the heat from the dash
had expanded the plug causing a loose connection.  The lose connection in
turn rubbed through the copper strips that make the connection.

To correct it I bent the connector pins in the female plug down to make
better contact, then to repair the copper strip on the male end.  I used
some metallic copper pc board repair, it is liquid like fingernail polish
and brushed it on.  The mail ends are nothing more than copper glued on
plastic do not solder or it will melt.  I have had no problem since.

Signature

Coasty

Remove the SPOOGE to reply

Ernie news - 07 Aug 2005 16:57 GMT
I have a 2001 2500 ram diesel same problem went on and off for 4 years now I
went to dealer to fix..new cluster 700.00 and waiting for the part to come
in also trip would rest to 0 every time I shut off  engine and lost high
beam indicator..will be curious to see if all this comes back when new
cluster install..
Ernie
 
Sign In
Join
My Latest Posts
My Monitored Threads
My Blog
My Photo Gallery
My Profile
My Homepage

Start New Thread
Enable EMail Alerts
Rate this Thread



©2008 Advenet LLC   Privacy Policy - Terms of Use
This website includes both content owned or controlled by Advenet as well as content owned or controlled by third parties.