remove rear seat, how to

Thread view:

Enable EMail Alerts

Start New Thread

Thread rating:

Dan - 21 Oct 2005 16:06 GMT

2005, 1500 Quad Cab
Anyone know of some good step-by-step instructions on how to do this?

------------ And now a word from our sponsor ------------------
For a quality usenet news server, try DNEWS, easy to install,
fast, efficient and reliable. For home servers or carrier class
installations with millions of users it will allow you to grow!
---- See http://netwinsite.com/sponsor/sponsor_dnews.htm ----

Reply to this Message

Tom Lawrence - 21 Oct 2005 18:14 GMT

> Anyone know of some good step-by-step instructions on how to do this?

Flip the seats up - remove the bolts that hold the frames to the floor, and
take them out. If you have the load floor, you have to remove that first.
You'll find two bolts in the rear, one on each side, and two more bolts
underneath the load floor itself (flip the floor up).

Reply to this Message

Dan - 25 Oct 2005 13:46 GMT

Sounds simple enough.
Do you happen to know the torque specs for tightening them back down?

>> Anyone know of some good step-by-step instructions on how to do this?
>
> Flip the seats up - remove the bolts that hold the frames to the floor,
> and take them out. If you have the load floor, you have to remove that
> first. You'll find two bolts in the rear, one on each side, and two more
> bolts underneath the load floor itself (flip the floor up).

------------ And now a word from our sponsor ------------------
Want to have instant messaging, and chat rooms, and discussion
groups for your local users or business, you need dbabble!
-- See http://netwinsite.com/sponsor/sponsor_dbabble.htm ----

Reply to this Message

Tom Lawrence - 25 Oct 2005 15:22 GMT

> Do you happen to know the torque specs for tightening them back down?

18 ft.lbs. for the nuts on the load floor... 30 ft.lbs. for all other bolts
(load floor and seats)

Reply to this Message