Home | Contact Us | FAQ | Search & Site Map | Link to Us
Sign In | Join | Other 45 Sites in Network
HomeAnnouncements
Discussion Groups
By Brand
BMWChevroletDodgeFordGMHondaLexusMercedes-BenzNissanPeugeotToyotaVolkswagenOther Brands
By Topic
4x4 CarsRVsDrivingMaintenance & RepairCar AudioCollectible Cars
Country Specific
Australian ForumsUK Forums
ArticlesAuto InsuranceBuyingCars & TechnologyMaintenanceMiscellaneousSafety
DMV Resources
Related Topics
MotorcyclesBoatsMore Topics ...

Car Forum / Dodge / Dodge Trucks / November 2005

Tip: Looking for answers? Try searching our database.

1986 dodge pick up,gas tank

Thread view: 
Enable EMail Alerts  Start New Thread
Thread rating: 
Loges - 25 Oct 2005 16:34 GMT
Hi,I have a 1986 3/4 ton dodge pickup,360 engine,2 wheel drive,i don't get
any gas from tank to fuel pump,blew line from fuel pump to tank, gas
started flowing,truck run 2 days or about 75 miles,gas stoped again,blew
line to tank,still no gas,its a 25 gal tank,can i drop the gas tank,or is
there something i should look for from fuel pump to gas tank,would
appricate any help,thanks for your time,Louie

jerry@midrivers.com
Big Al - 26 Oct 2005 05:44 GMT
> Hi,I have a 1986 3/4 ton dodge pickup,360 engine,2 wheel drive,i don't get
> any gas from tank to fuel pump,blew line from fuel pump to tank, gas
[quoted text clipped - 4 lines]
>
> jerry@midrivers.com

It's easy to drop the tank. On my 90 the fuel hoses were swaged on and I had
to cut the swaged Aluminum sleeves. Since you're dealing with gasoline,
don't use a Dremel or other electric tool. Use a hack saw.

Here is how I got mine out. Find a scrap of plywood to put under the tank,
use a floor jack to lift it a tiny bit. Remove the two steel straps and the
rubber hose on the gas filler tube. Then let the tank down a little. You can
then get to the hoses at the top and get them off. Then let it down more and
remove the wires, and let it down.

The top of the tank has an opening that has the pickup and fuel level
sender. It comes off easily. You may find a bunch of stuff in the tank
stopping up the inlet sock. The best thing to clean the tank out with is
regular dish soap and very hot water. Dawn works great.

Al
Loges - 26 Oct 2005 13:42 GMT
thanks Big Al,will try to tank off today ,again thanks for your time,have a
good day,Louie
Loges - 28 Oct 2005 23:09 GMT
Hi Big AL,Loges,i asked about taking a gas tank off a 1986 dodge 3/4 ton
2wheel drive,360 eng,i have tank off ,this is a fiberglass or plastic
tank,it has B 30 on the tank,i couln't find anything on the sending
unit,to get the sending unit off ,ther is a plastic holder that screws off
with threads on it,i cracked the top of it taking it off,iam sure its a 30
gal tank,the sock on the bottom of sending unit looks dirthy, but could
blow threw it,i didn't find any hoses that were soft,do you know anything
about this kind of gas tank ,or were i could find a number on it,should i
order a new sending unit?,where do you order from?Thanks again for your
time and help,Louie
Big Al - 29 Oct 2005 08:34 GMT
> Hi Big AL,Loges,i asked about taking a gas tank off a 1986 dodge 3/4 ton
> 2wheel drive,360 eng,i have tank off ,this is a fiberglass or plastic
[quoted text clipped - 6 lines]
> order a new sending unit?,where do you order from?Thanks again for your
> time and help,Louie

The tank is plastic. Should have mentioned that:)  The sender has a large
lock ring around it. You turn it to get the sender out. On some tanks it
looks like a giant plastic jar lid with a hole in the center. On others it's
steel. If you look at it you can see the way it clamps the top of the sender
down. After you get the sender out you can replace the sock. It's an auto
parts store item.

Al
Loges - 29 Oct 2005 15:23 GMT
thanks Big AL i hhave sending unit out will try to find sock,were can i get
a sending unit from?> thanks again for the help.Louie
Loges - 01 Nov 2005 00:22 GMT
Hi,again,Big AL,I asked about the sending unit on a 1986,dodge pickup,
2wheel drive,360,engine,30 gal gas tank,is plastic,i have tank off,and
sending unit out of tank,the sock is not round,its flat, but i think it
was round at one time,at the bottom of unit there is a black rubber about
2,1/2 long,there are 2 wires going to it,i can see what looks like little
blades,i can turn them,is suppose to run when you turn the key on would it
then suck gas into gas line?? Thanks for the help,do you know where i can
find a sending unit,for this dodge,thanks again for the help and your
time,Louie
jerry@midrivers.com
Big Al - 02 Nov 2005 19:51 GMT
> Hi,again,Big AL,I asked about the sending unit on a 1986,dodge pickup,
> 2wheel drive,360,engine,30 gal gas tank,is plastic,i have tank off,and
[quoted text clipped - 6 lines]
> time,Louie
> jerry@midrivers.com

You lost me. Are you looking for a sender or the fuel pump? The original
electric fuel pump is a Carter and you can buy the original at discount auto
parts stores. If the gas gauge works correctly you do not need a sender.
BTW: Change the plastic hose going from the pump to the top of the tank. Use
regular good fuel line and gear clamps. The plastic stuff gets hard and
breaks.

Al
 
Sign In
Join
My Latest Posts
My Monitored Threads
My Blog
My Photo Gallery
My Profile
My Homepage

Start New Thread
Enable EMail Alerts
Rate this Thread



©2008 Advenet LLC   Privacy Policy - Terms of Use
This website includes both content owned or controlled by Advenet as well as content owned or controlled by third parties.