ABS light and computer terminals.

Thread view:

Enable EMail Alerts

Start New Thread

Thread rating:

Matthew Warren - 28 Oct 2005 03:41 GMT

'95 B3500 W/318 and OD trans. Replaced the wiring harness last spring from
a donor vehicle that had ABS. Since mine doesn't have anti-lock the ABS and
brake lights are on all the time now. Is there anyway that I can defeat
this short of pulling the bulbs from the dash? I would like to maintain the
Brake warning light if I can. I Guess I'm hoping I can jumper a couple of
contacts or something similar... any thoughts greatly appreciated. thanks

Matt

Reply to this Message

TBone - 28 Oct 2005 14:51 GMT

Are you sure that you do not have rear wheel ABS?

Signature

If at first you don't succeed, you're not cut out for skydiving

> '95 B3500 W/318 and OD trans. Replaced the wiring harness last spring from
> a donor vehicle that had ABS. Since mine doesn't have anti-lock the ABS and
[quoted text clipped - 4 lines]
>
> Matt

Reply to this Message

Matthew Warren - 29 Oct 2005 02:48 GMT

Yes. There is no box under the battery tray to plug the wiring into, as
there was on the truck I took it from.

> Are you sure that you do not have rear wheel ABS?
>
[quoted text clipped - 11 lines]
>>
>> Matt

Reply to this Message