89 raider no spark

Thread view:

Enable EMail Alerts

Start New Thread

Thread rating:

rodchester - 18 Dec 2005 00:17 GMT

have a 89 raider 3.0 it just died during warmup .no fire out of coil
replaced with a new one nothing changed .it turns over great. any help would
be appreciated

Reply to this Message

clare at snyder.on.ca - 18 Dec 2005 02:53 GMT

>have a 89 raider 3.0 it just died during warmup .no fire out of coil
>replaced with a new one nothing changed .it turns over great. any help would
>be appreciated

Does the distributor turn? Do you have good compression? or did the
timing belt let go???

Reply to this Message

mg - 24 Dec 2005 14:06 GMT

>have a 89 raider 3.0 it just died during warmup .no fire out of coil
>replaced with a new one nothing changed .it turns over great. any help would
>be appreciated

Did you pull the codes? There is a diagnostic plug behind the glove
box. Take a look at www.4x4wire.com they have the process documented.

Signature

Email hint - Everything after the @ is spelled backwards.

There are only 10 types of people in the world:
those that understand binary, and
those that don't.

Reply to this Message

222 - 28 Dec 2005 22:45 GMT

have you ck'd your ballast resistor? on my 89 d-50 2.6 it's mounted near
the left fender. it's a white ceramic elec. part with a coil wire under
it.if that is burnt into that could be your culprit. also could be
corroded. if new one is required,about 15.00. hope this will help. also i
need a vaccum hose diagram for 89 d-50 2.6 mitsubishi mckiney carb. about
46 hoses. can't find one anywhere. thanks.

Reply to this Message