Is the Ram logo on 2005 Ram tailgate secured with adhesive or drilled hole/post

Thread view:

Enable EMail Alerts

Start New Thread

Thread rating:

Loch - 06 Jan 2006 16:17 GMT

I want to paint a graphic on the tailgate and the logo is in the way.
I will remove it if only adhesive is used, but do not want to patch &
fill a pre-drilled hole.

TIA

Reply to this Message

T.Diesel - 07 Jan 2006 05:25 GMT

The emblem is held on by 3M automotive grade tape.

Reply to this Message

Coasty - 07 Jan 2006 12:16 GMT

Use some of that stuff called OOPS to remove the glue residue. There is
plastic tool used for removing stickers it has a small plastic blade on it
my wife gets them at Wal-Mart. Use your finger nail to get it started and
as you are picking at it use a hair dryer to keep it warm and soft.. In
about 1 1/2 hours you will be done.

Coasty

>I want to paint a graphic on the tailgate and the logo is in the way.
> I will remove it if only adhesive is used, but do not want to patch &
> fill a pre-drilled hole.
>
> TIA

Reply to this Message

Loch - 07 Jan 2006 16:43 GMT

Thanks for the reply and tips.

>Use some of that stuff called OOPS to remove the glue residue. There is
>plastic tool used for removing stickers it has a small plastic blade on it
[quoted text clipped - 9 lines]
>>
>> TIA

Reply to this Message

Roy - 07 Jan 2006 16:48 GMT

> Thanks for the reply and tips.

Use a hair dryer and it should be off in 10 minutes

Roy

Reply to this Message