'64 Dodge longbed clutch question

Thread view:

Enable EMail Alerts

Start New Thread

Thread rating:

nSurferx - 28 Oct 2006 00:16 GMT

What size are the clutch & flywheel set for my '64 Dodge longbed slant 6
225 c.i. with 3spd on tree?

10" or 11" inches?

TIA.

Reply to this Message

Budd Cochran - 28 Oct 2006 03:16 GMT

Probably a 10" as the Valiant passenger cars used a 9" and I swapped a 10"
clutch and pressure plate from a into a slant six Valiant when the parts
store said that was all they had on hand and overnight delivery was still a
decade away.

Signature

Budd Cochran

John 3:16-17, Ephesians 2:8-9, Romans 3:23, 6:23

"Our Constitution was made only for a moral and religious people.
It is wholly inadequate for the government of any other."
(John Adams)

> What size are the clutch & flywheel set for my '64 Dodge longbed slant 6
> 225 c.i. with 3spd on tree?
>
> 10" or 11" inches?
>
> TIA.

Signature

Posted via a free Usenet account from http://www.teranews.com

Reply to this Message

Bryan - 28 Oct 2006 11:14 GMT

nSurferx queried:

> What size are the clutch & flywheel set for my '64 Dodge longbed slant 6
> 225 c.i. with 3spd on tree?
>
> 10" or 11" inches?
>
> TIA.

For what it's worth, the Hays and Ram Clutches say that from '69 thru '83,
all D/W-100 thru -350s used an 11" setup. However, further searching showed
an exact application on the Luk website (http://tinyurl.com/un8v4) where it
shows you have a 10" cover assembly with the disc being 9¼" diameter.
Bryan

Reply to this Message

nSurferx - 29 Oct 2006 08:50 GMT

> For what it's worth, the Hays and Ram Clutches say that from '69 thru '83,
> all D/W-100 thru -350s used an 11" setup. However, further searching showed
> an exact application on the Luk website (http://tinyurl.com/un8v4) where it
> shows you have a 10" cover assembly with the disc being 9¼" diameter.
> Bryan

Thanks! Now that is my 'to do' list the first thing for my '64 Dodge.

Reply to this Message