 |
 | Home | Contact Us | FAQ | Search & Site Map | Link to Us |
 | Sign In | Join | Other 45 Sites in Network |
Car Forum / Dodge / Dodge Trucks / November 200601 DODGE RAM LOW OIL PRESSURE
I AM HAVING A LOW OIL PRESSURE PROBLEM WITH MY TRUCK,FIRST OFF I AM AN ASE TECH SO I KNOW WHAT I AM DOING,SO ANYWAYS IT HAS LOW OIL PRESSURE AT IDLE AFTER ENGINE IS WARM,SO I WENT TO CHANGE THE OIL PUMP,IT ALLREADY HAD AN AFTERMARKET HIGH VOLUME OIL PUMP IN IT,THE SAME ONE THAT I BOUGHT,BUT I PUT THE NEW ONE IN ANYWAYS,STILL LOW OIL PRESSURE,SO I CHANGE THE SENDING UNIT,WITCH WAS LOOKED NEW,SAME LOW OIL PRESSUERE PROBLEM,AND ALSO I HAVE WHAT SOUNDS LIKE A SLIGHT LIFTER NOISE ABOVE 3K RPM,LIKE THE LIFTERS ARENT PUMPING ALL THE WAY UP,SO I PULL OFF THE VALVE COVERS AND CHECK ALL THE PUSH RODS,ALL ARE CLEAN AND I PERFECT SHAPE,THEN FINNALY THE VALVE CLATTER HAS GOTTEN A LITTLE WORSE AND NOW I HAVE A CYLINDER 1 MISFIRE CODE,SO NOW IM ALMOST SURE IT IS THE LIFTERS NOT PUMPING UP,BUT WHAT I DONT UNDERSTAND IS WHY IS THERE LOW OIL PRESSURE AT IDLE BUT WHEN ABOVE 1K RPM IT HAS 100PSI WITH THE HIGH VOLUME PUMP,AND NO ITS NOT BEARING CLEARNCE ALL BEARINGS ARE IN PERFECT SHAPE AND ARE NEW,I DONT UNDERSTAND WHAT TO DO HERE I WAS GOING TO CHANGE ALL THE LIFTERS BUT I DONT KNOW IF THAT WILL SOLVE MY LOW OIL PRESSURE PROBLEM OR THE VALVE CLATTER,AND NO ITS NOT SPARK KNOCK,ANY HELP PLEASE????????? THANKS -DANIEL >I AM HAVING A LOW OIL PRESSURE PROBLEM WITH MY TRUCK,FIRST OFF I AM AN >ASE TECH SO I KNOW WHAT I AM DOING,SO ANYWAYS IT HAS LOW OIL PRESSURE [quoted text clipped - 14 lines] >LOW OIL PRESSURE PROBLEM OR THE VALVE CLATTER,AND NO ITS NOT SPARK >KNOCK,ANY HELP PLEASE????????? THANKS -DANIEL Put some 20w50 in it. beekeep And press the darn caps lock key once!!!  Signature------------------------------------------ Laszlo Almasi ----Cool Toys (formerly Carolina Watercraft Works) ----Mack Daddy Trailers ----Ice Angels >>I AM HAVING A LOW OIL PRESSURE PROBLEM WITH MY TRUCK,FIRST OFF I AM AN >>ASE TECH SO I KNOW WHAT I AM DOING,SO ANYWAYS IT HAS LOW OIL PRESSURE [quoted text clipped - 18 lines] > > beekeep If you stop shouting, I'll be happy to offer a couple very valid ideas. You're hurting my ears. SignatureChristopher A. Young You can't shout down a troll. You have to starve them. . I AM HAVING A LOW OIL PRESSURE PROBLEM WITH MY TRUCK,FIRST OFF I AM AN ASE TECH SO I KNOW WHAT I AM DOING,SO ANYWAYS IT HAS LOW OIL PRESSURE AT IDLE AFTER ENGINE IS WARM,SO I WENT TO CHANGE THE OIL PUMP,IT ALLREADY HAD AN AFTERMARKET HIGH VOLUME OIL PUMP IN IT,THE SAME ONE THAT I BOUGHT,BUT I PUT THE NEW ONE IN ANYWAYS,STILL LOW OIL PRESSURE,SO I CHANGE THE SENDING UNIT,WITCH WAS LOOKED NEW,SAME LOW OIL PRESSUERE PROBLEM,AND ALSO I HAVE WHAT SOUNDS LIKE A SLIGHT LIFTER NOISE ABOVE 3K RPM,LIKE THE LIFTERS ARENT PUMPING ALL THE WAY UP,SO I PULL OFF THE VALVE COVERS AND CHECK ALL THE PUSH RODS,ALL ARE CLEAN AND I PERFECT SHAPE,THEN FINNALY THE VALVE CLATTER HAS GOTTEN A LITTLE WORSE AND NOW I HAVE A CYLINDER 1 MISFIRE CODE,SO NOW IM ALMOST SURE IT IS THE LIFTERS NOT PUMPING UP,BUT WHAT I DONT UNDERSTAND IS WHY IS THERE LOW OIL PRESSURE AT IDLE BUT WHEN ABOVE 1K RPM IT HAS 100PSI WITH THE HIGH VOLUME PUMP,AND NO ITS NOT BEARING CLEARNCE ALL BEARINGS ARE IN PERFECT SHAPE AND ARE NEW,I DONT UNDERSTAND WHAT TO DO HERE I WAS GOING TO CHANGE ALL THE LIFTERS BUT I DONT KNOW IF THAT WILL SOLVE MY LOW OIL PRESSURE PROBLEM OR THE VALVE CLATTER,AND NO ITS NOT SPARK KNOCK,ANY HELP PLEASE????????? THANKS -DANIEL >I AM HAVING A LOW OIL PRESSURE PROBLEM WITH MY TRUCK,FIRST OFF I AM AN > ASE TECH SO I KNOW WHAT I AM DOING, ok so follow basic mechanical engine diagnostic techniques. SO ANYWAYS IT HAS LOW OIL PRESSURE > AT IDLE AFTER ENGINE IS WARM,SO I WENT TO CHANGE THE OIL PUMP,IT > ALLREADY HAD AN AFTERMARKET HIGH VOLUME OIL PUMP IN IT,THE SAME ONE > THAT I BOUGHT,BUT I PUT THE NEW ONE IN ANYWAYS,STILL LOW OIL > PRESSURE,SO I CHANGE THE SENDING UNIT,WITCH WAS LOOKED NEW,SAME LOW OIL > PRESSUERE PROBLEM, ok so at this point have you performed a mechanical oil pressure test using a test gauge? your ASE so get it out of your box if you havent. AND ALSO I HAVE WHAT SOUNDS LIKE A SLIGHT LIFTER > NOISE ABOVE 3K RPM,LIKE THE LIFTERS ARENT PUMPING ALL THE WAY UP,SO I > PULL OFF THE VALVE COVERS AND CHECK ALL THE PUSH RODS,ALL ARE CLEAN AND [quoted text clipped - 7 lines] > LOW OIL PRESSURE PROBLEM OR THE VALVE CLATTER,AND NO ITS NOT SPARK > KNOCK,ANY HELP PLEASE????????? THANKS -DANIEL if its truly oil pressure related. then it has to be a bearing clearance (somewhere in the engine), pump, pickup tube, or oil level problem. that's the only things it could be. you've said you have been in both top and bottom and all is clean? drain back holes from the lifter valley and heads aren't stopped up? (odd question I know) no sludge floating around in the pan? the bearings are prime? what about the crank? have you used plastigauge to measure clearances? your digging pretty deep into the engine by opening both top and bottom without mention of an mechanical oil pressure gauge test. Signature---------------------------- -Chris 05 CTD 06 Liberty CRD Real Trucks don't NEED spark plugs. That sounds like a LOT of work. Which may not be needed. However, he'll have to ask without shouting. SignatureChristopher A. Young You can't shout down a troll. You have to starve them. . if its truly oil pressure related. then it has to be a bearing clearance (somewhere in the engine), pump, pickup tube, or oil level problem. that's the only things it could be. you've said you have been in both top and bottom and all is clean? drain back holes from the lifter valley and heads aren't stopped up? (odd question I know) no sludge floating around in the pan? the bearings are prime? what about the crank? have you used plastigauge to measure clearances? your digging pretty deep into the engine by opening both top and bottom without mention of an mechanical oil pressure gauge test. what sounds like a lot of work? putting a mechanical test gauge on? the rest of the questions were about observations that he should have already made because of what he said he already did. granted he doesn't know how to turn off caps lock, but that wouldn't stop me from asking why he hasn't run a mechanical oil pressure test. witch was my point. and my only point. he says he's ASE this isn't anything out of the ordinary. either its wore out or it isn't, either it pumps or it doesn't. where else OTHER than a mechanical gauge test would you have him start??????? Signature---------------------------- -Chris 05 CTD 06 Liberty CRD Real Trucks don't NEED spark plugs. > That sounds like a LOT of work. Which may not be needed. However, > he'll have to ask without shouting. [quoted text clipped - 15 lines] > bottom > without mention of an mechanical oil pressure gauge test. My 95 Ram has had this problem for the last year, I put the mechanical gauge on and it was normal, replaced sending unit...Still the same low pressure light on the dash, and the gauge drops to zero when its warmed up...BUT no adverse effects whatsoever in the last year of driving it like this (knock on wood) > where else OTHER than a mechanical gauge test would you have him > start??????? I'd change the oil filter first. Maybe it's restricted and bypassing at 1000 RPM. Then, I'd do a bit of research to see what exact conditions will set a #1 misfire code. I don't think the computer can see a valvetrain induced misfire. If the plug and injector is working, how does the computer know which cylinder didn't fire? But I'm not an ASE tech so I don't know what I'm doing... SignatureKen He hasn't asked yet, so I won't comment. SignatureChristopher A. Young You can't shout down a troll. You have to starve them. . what sounds like a lot of work? putting a mechanical test gauge on? the rest of the questions were about observations that he should have already made because of what he said he already did. granted he doesn't know how to turn off caps lock, but that wouldn't stop me from asking why he hasn't run a mechanical oil pressure test. witch was my point. and my only point. he says he's ASE this isn't anything out of the ordinary. either its wore out or it isn't, either it pumps or it doesn't. where else OTHER than a mechanical gauge test would you have him start??????? Signature---------------------------- -Chris 05 CTD 06 Liberty CRD Real Trucks don't NEED spark plugs. > That sounds like a LOT of work. Which may not be needed. However, > he'll have to ask without shouting. [quoted text clipped - 15 lines] > bottom > without mention of an mechanical oil pressure gauge test. |
Reply to this Message |
 Sign In
 Join
 My Latest Posts My Monitored Threads My Blog My Photo Gallery My Profile My Homepage Start New Thread Enable EMail Alerts Rate this Thread
|
©2008 Advenet LLC Privacy Policy - Terms of Use
This website includes both content owned or controlled by Advenet as well as content owned or controlled by third parties.