 |
 | Home | Contact Us | FAQ | Search & Site Map | Link to Us |
 | Sign In | Join | Other 45 Sites in Network |
Car Forum / Dodge / Dodge Trucks / January 200798 5.2L Ram oil pressure
Can anyone tell me where the oil sending unit is located on a 98 Ram with a 5.2 in it? Still losing oil pressure when at idle so I'll start there. Thanks its on top at the back of the block near the distributor. I would put a mechanical oil pressure gauge on (you have to remove the sending unit and screw the hose for a mechanical test gauge in) and run it to verify the oil pressures. take a good look at the sending unit and make sure its not leaking up through the connector if the mechanical test checks out ok. besure you run the engine long enough to duplicate the conditions where you are seeing the drop in oil pressure.  Signature---------------------------- -Chris 05 CTD 06 Liberty CRD Real Trucks don't NEED spark plugs. > Can anyone tell me where the oil sending unit is located on a 98 Ram with > a > 5.2 in it? Still losing oil pressure when at idle so I'll start there. > Thanks How the heck do I get to it???? Is there a socket to fit it or do I need to move all that crap out of the way to get a wrench in there? Wrench looks like a real tight fit! you will need a oil pressure sending unit socket tall enough for the sensor. I think you can get them at the local auto parts store. I bought mine through Matco. Signature---------------------------- -Chris 05 CTD 06 Liberty CRD Real Trucks don't NEED spark plugs. > How the heck do I get to it???? Is there a socket to fit it or do I need > to move all that crap out of the way to get a wrench in there? Wrench > looks like a real tight fit! O.K. Changed the sending unit and no go. Dropped the pan and changed the pump next. The gauge didn't go to zero for 2 days, then did it 2 times on the same trip, only at idle. On the return trip and there after, didn't do anything. Ran tranny fluid through with an oil change before pump change. Haven't done mechanical gauge pressure check yet. Will sending unit be screwed into mechanical gage? Noticed I was about 1/2-3/4 quart oil low. No leaks anywhere and can't smell burning oil. Where can it be going?? Thanks for all the help. Here's a source of both Haynes AND Chilton's manuals. Good luck. http://www.themotorbookstore.com/chilton.html Wolfie > Can anyone tell me where the oil sending unit is located on a 98 Ram with a > 5.2 in it? Still losing oil pressure when at idle so I'll start there. > Thanks A friend of mine (who is a better mechanic than I will ever be) says this is a common problem with Valvoline instant oil change places. I'd try an oil change before a sending unit test. My favorite is Castrol. SignatureChristopher A. Young You can't shout down a troll. You have to starve them. . > Can anyone tell me where the oil sending unit is located on a 98 Ram with a > 5.2 in it? Still losing oil pressure when at idle so I'll start there. > Thanks
|
Reply to this Message |
 Sign In
 Join
 My Latest Posts My Monitored Threads My Blog My Photo Gallery My Profile My Homepage Start New Thread Enable EMail Alerts Rate this Thread
|
©2008 Advenet LLC Privacy Policy - Terms of Use
This website includes both content owned or controlled by Advenet as well as content owned or controlled by third parties.