> Had a fellow tell me today that, if I accelerate quickly, but avoid 4th
> gear and shift directly from 3rd to 5th I'll get better gas mileage.
[quoted text clipped - 5 lines]
>
> Comments?
Throwing away an available gear ratio seems backward to me.
A continually variable transmission (CVT) would have to be the best.
That gives you infinite ratios, and the engine can operate at the speed
where it's most efficient.
Airplanes use constant speed props to do that. Add throttle, and the
propeller blades twist to take a bigger bite out of the air, while
engine speed remains the same.

Signature
TThis explains it ALL!!! He was home schooled and his mommy
made his GES diploma for him out of needle point, to go
with his pin head and needle dick. :) -- punkin
theguy@whatever.net - 23 May 2007 20:22 GMT
>> Had a fellow tell me today that, if I accelerate quickly, but avoid 4th
>> gear and shift directly from 3rd to 5th I'll get better gas mileage.
[quoted text clipped - 7 lines]
>
>Throwing away an available gear ratio seems backward to me.
ah yes. backward. you have experience in that don't you?
>A continually variable transmission (CVT) would have to be the best.
>That gives you infinite ratios, and the engine can operate at the speed
[quoted text clipped - 3 lines]
>propeller blades twist to take a bigger bite out of the air, while
>engine speed remains the same.
Pete - 23 May 2007 20:45 GMT
>>> Had a fellow tell me today that, if I accelerate quickly, but avoid 4th
>>> gear and shift directly from 3rd to 5th I'll get better gas mileage.
[quoted text clipped - 17 lines]
>>propeller blades twist to take a bigger bite out of the air, while
>>engine speed remains the same.
In semis we do that all the time..its called skip shifing.
But it should go begin in 2nd skip 3rd shif mid rpm into 5th. from 4th
Leviathan - 23 May 2007 21:44 GMT
I've always heard it called "Short Shifting". Used in racing, like the old
Indy cars, to conserve fuel.
Larry
Behold Beware Believe
: >>> Had a fellow tell me today that, if I accelerate quickly, but avoid 4th
: >>> gear and shift directly from 3rd to 5th I'll get better gas mileage.
[quoted text clipped - 20 lines]
: In semis we do that all the time..its called skip shifing.
: But it should go begin in 2nd skip 3rd shif mid rpm into 5th. from 4th

Signature
Posted via a free Usenet account from http://www.teranews.com
Beryl - 23 May 2007 23:33 GMT
>>On Wed, 23 May 2007 11:00:54 -0700, Beryl <terrapin@coolbits.net>
>>>
[quoted text clipped - 22 lines]
> In semis we do that all the time..its called skip shifing.
> But it should go begin in 2nd skip 3rd shif mid rpm into 5th. from 4th
Ah, semis. It almost sounds like they're in the same gear after a shift.
Kind of like shifting a 10-15-18-21-speed bicycle, I suppose. You won't
want to run up through every gear all the time, just lose precious
momentum doing that.

Signature
This explains it ALL!!! He was home schooled and his mommy
made his GES diploma for him out of needle point, to go
with his pin head and needle dick. :) -- punkin
SnoMan - 23 May 2007 21:25 GMT
>Throwing away an available gear ratio seems backward to me.
>A continually variable transmission (CVT) would have to be the best.
>That gives you infinite ratios, and the engine can operate at the speed
>where it's most efficient.
This is ture but if you want to save gas with a manual, you do not
want to accelrate quickly or skip 4th. If anything, you want to get
out of 1st and second quickly without taching it out. Especailly
first. Do not slip clutch much either
>Airplanes use constant speed props to do that. Add throttle, and the
>propeller blades twist to take a bigger bite out of the air, while
>engine speed remains the same.
Airplanes do it mainly to maintain peak HP RPM while accelerating and
climbing out as air desinty and speed changes. When you go for max
economy on a piston powered airplane with a constant speed prop you
actually reduce prop RPM too along with manifold pressure. (take a
bigger bite at a lower RPM) because the prop consumes power slicing
through the air too and in a econ cruise you can save fuel by reducing
prop RPM.
-----------------
TheSnoMan.com
Your vehicle`s RPM`s are lower the higher the gear your in.
The lower the RPM`s means your engine isn`t working as hard. ( Just don`t
take off in 5th gear ) LoL
> Had a fellow tell me today that, if I accelerate quickly, but avoid 4th
> gear and shift directly from 3rd to 5th I'll get better gas mileage.
[quoted text clipped - 5 lines]
>
> Comments?
>Had a fellow tell me today that, if I accelerate quickly, but avoid 4th
>gear and shift directly from 3rd to 5th I'll get better gas mileage.
[quoted text clipped - 5 lines]
>
>Comments?
Accelerate gently and shift up as soon as the truck will pull in the
next higher gear.
Big Al - 24 May 2007 07:10 GMT
> >Had a fellow tell me today that, if I accelerate quickly, but avoid 4th
> >gear and shift directly from 3rd to 5th I'll get better gas mileage.
[quoted text clipped - 8 lines]
> Accelerate gently and shift up as soon as the truck will pull in the
> next higher gear.
Don't some Vipers have Skip Shift? The transmission shifts from first to
fourth at low throttle to save gas.
Al
Roy - 24 May 2007 12:20 GMT
>> >Had a fellow tell me today that, if I accelerate quickly, but avoid 4th
>> >gear and shift directly from 3rd to 5th I'll get better gas mileage.
[quoted text clipped - 13 lines]
>
> Al
My Z06 had it as well. Some deal for the epa mileage thing. It is a real
pia, but very easy to eliminate. The first mod everybody does.
Roy
Chris Thompson - 25 May 2007 00:50 GMT
>>> >Had a fellow tell me today that, if I accelerate quickly, but avoid 4th
>>> >gear and shift directly from 3rd to 5th I'll get better gas mileage.
[quoted text clipped - 18 lines]
>
> Roy
huh...never noticed...of course the 5 or 6 times i had the opportunity to
drive a viper i wasn't babying it LOL. guess I'm lucky the law didn't come
after me with the way i pushed the throttle.

Signature
____________________________________________
Chris
05 CTD
06 Liberty CRD