2003 Dakota brakes

Thread view:

Enable EMail Alerts

Start New Thread

Thread rating:

Jimmy - 21 Sep 2007 20:15 GMT

I'm going to replce my front disc brakes on my 03 dakota. I'v worked on
mostly GM brakes, they use a allen head driver (?) to remove the pins. Are
these the same and what size?

Thanks
Jimmy

Reply to this Message

Tom Lawrence - 21 Sep 2007 22:05 GMT

> I'm going to replce my front disc brakes on my 03 dakota. I'v worked on
> mostly GM brakes, they use a allen head driver (?) to remove the pins. Are
> these the same and what size?

These brakes are very similar, but the slide pins have regular 6-point bolt
heads... a socket set is all you need.

Pay particular attention to the orientation of the anti-rattle clips. They
can be tricky to put back if you mix up the top/bottom clips.

Reply to this Message

Jimmy - 22 Sep 2007 08:06 GMT

Thanks for the info and tip. All should go smoothly.

>> I'm going to replce my front disc brakes on my 03 dakota. I'v worked on
>> mostly GM brakes, they use a allen head driver (?) to remove the pins.
[quoted text clipped - 5 lines]
> Pay particular attention to the orientation of the anti-rattle clips.
> They can be tricky to put back if you mix up the top/bottom clips.

Reply to this Message