There are three push-in fasteners attaching the seal to the radiator closure
panel.  Remove these with a screwdriver (pry them out) - these may only
exist on the sport model with quad headlamps.  Next, remove the park/signal
lamp from the inside, then remove the screws holding the top of the headlamp
module to the radiator closure panel.

From behind the bumper, remove the screws attaching the bottom of the
headlamp module to the radiator closure panel.  then, loosen the bumper
mounting nuts to allow the bumper to drop down a bit for clearance.  Pull
the headlamp module out, and disconnect the wiring to the bulbs.