 |
 | Home | Contact Us | FAQ | Search & Site Map | Link to Us |
 | Sign In | Join | Other 45 Sites in Network |
Car Forum / Dodge / Dodge Cars / July 20072002 intrepid error code p-0441
ahve 2002 intrepid 2.7 v6 with code showing p-0441 replaced purge control valve and the engine lightg is still on and code is still in memory. can anyone suggest where to go from here it would be greatly appreciated! > ahve 2002 intrepid 2.7 v6 with code showing p-0441 replaced purge control > valve and the engine lightg is still on and code is still in memory. can > anyone suggest where to go from here it would be greatly appreciated! http://www.allpar.com/fix/computer-codes.html >> ahve 2002 intrepid 2.7 v6 with code showing p-0441 replaced purge control >> valve and the engine lightg is still on and code is still in memory. can >> anyone suggest where to go from here it would be greatly appreciated! > > http://www.allpar.com/fix/computer-codes.html if the purge control valve solved the evaporative purge control issue then you may need to have the code cleared,or there may still be another issue with the evaporative system that is in need of repair. > ahve 2002 intrepid 2.7 v6 with code showing p-0441 replaced purge control > valve and the engine lightg is still on and code is still in memory. can > anyone suggest where to go from here it would be greatly appreciated! You could have a pinched hose from the throttle body to the purge valve. make sure the vacuum hose is connected and has vacuum. The NVLD (Natural vacuum leak detection) switch could be at fault . A series of test with the proper scan tool is required to check this out Glenn Beasley Chrysler Tech >> ahve 2002 intrepid 2.7 v6 with code showing p-0441 replaced purge control >> valve and the engine lightg is still on and code is still in memory. can [quoted text clipped - 7 lines] >Glenn Beasley >Chrysler Tech Glen, just got back from holiday and checked car again.I read something on an earlier posting of things to check.I did check for vacuum at the throttle body and it was positive and there is no problem with the hose going to the purge valvefrom the body. What I did then was check for power to the valve by unplugging the connector to the valve and there was no power present with the car running or without the car running and thje key in the on position.Where do I go from here? I now realize that there probably wasnt anything wrong with the old valve. >>> ahve 2002 intrepid 2.7 v6 with code showing p-0441 replaced purge control >>> valve and the engine lightg is still on and code is still in memory. can [quoted text clipped - 15 lines] >do I go from here? I now realize that there probably wasnt anything wrong >with the old valve. Glenn will straighten you out no doubt, but I would expect the purge valve to only be actuated with the engine running and only for a short duration. Once the purge cycle is complete that valve should never be actuated... > >> ahve 2002 intrepid 2.7 v6 with code showing p-0441 replaced purge control > >> valve and the engine lightg is still on and code is still in memory. can [quoted text clipped - 15 lines] > do I go from here? I now realize that there probably wasnt anything wrong > with the old valve. The purge monitor is run when the vehicle is cold and the engine running, You almost have to have a scan tool to diagnose such a fault because you have to know what the freeze frame date was when the fault matured. The fault code you are getting is NOT a fault code for the (Evap Purge Solenoid circuit P0443) Its an Evap System Performance Fault. You don't have a circuit or solenoid problem. Without having a scan tool to actuate the solenoid you aren't going to be able to test the circuit anyhow. You need to have the NVLD system checked to see if it is working correctly, This requires a scan tool to force the monitor to run. Glenn >> >> ahve 2002 intrepid 2.7 v6 with code showing p-0441 replaced purge control >> >> valve and the engine lightg is still on and code is still in memory. can [quoted text clipped - 13 lines] > >Glenn Much THANKS for all your help.I'll take it in the first of the week. JEFF > >> >> ahve 2002 intrepid 2.7 v6 with code showing p-0441 replaced purge control > >> >> valve and the engine lightg is still on and code is still in memory. can [quoted text clipped - 15 lines] > Much THANKS for all your help.I'll take it in the first of the week. > JEFF Let me know what the results are |
Reply to this Message |
 Sign In
 Join
 My Latest Posts My Monitored Threads My Blog My Photo Gallery My Profile My Homepage Start New Thread Enable EMail Alerts Rate this Thread
|
©2008 Advenet LLC Privacy Policy - Terms of Use
This website includes both content owned or controlled by Advenet as well as content owned or controlled by third parties.