damnnickname;720424 Wrote:
> You say you checked spark and fuel but dont specify what the fue
> pressure
[quoted text clipped - 5 lines]
> Glenn Beasley
> Chrysler Tech
Sorry, the fuel pressure is 46 psi, there are no faults in th
computer, and the vehicle has the 3.0 v6
--
Shawn H
maxpower - 06 Aug 2007 20:37 GMT
> damnnickname;720424 Wrote:
> > You say you checked spark and fuel but dont specify what the fuel
[quoted text clipped - 9 lines]
> Sorry, the fuel pressure is 46 psi, there are no faults in the
> computer, and the vehicle has the 3.0 v6.
Did you remove the upper timing belt cover to make sure the cams are set
with the crankshaft? If you have compression, and you have spark and you
have fuel it should start. try to disconnect the Map sensor to see if it
starts
Glenn