07 charger ball joint

Thread view:

Enable EMail Alerts

Start New Thread

Thread rating:

budslave - 15 Feb 2008 13:52 GMT

[This followup was posted to alt.autos.dodge and a copy was sent to the cited author.]

Hey everyone
does any one know if I have to
replace the whole front spindle
because of a broken ball joint
or can I just replace the ball
joint from the spindle.

T.I.A
Joe

Reply to this Message

damnnickname - 18 Feb 2008 09:52 GMT

Why not contact your local dealer to see if the ball joint is sold
seperate?????

Glenn Beasley
Chrysler Tech

--
Message posted using http://www.talkaboutautos.com/group/alt.autos.dodge/
More information at http://www.talkaboutautos.com/faq.html

Reply to this Message

HLS - 14 Mar 2008 02:21 GMT

> [This followup was posted to alt.autos.dodge and a copy was sent to the
> cited author.]
[quoted text clipped - 5 lines]
> or can I just replace the ball
> joint from the spindle.

I did a quick check in the Autozone parts site, and it would appear that you
can
replace the ball joint, 2WD or 4WD, independently of the spindle. This is,
in my
experience, a typical situation.

You might want to get your parts from some other supplier, like NAPA, but
that is your choice.

Dealerships dont necessarily do you any favors, nor are the parts
necessarily
any better than, or as good as, good aftermarket parts.

Reply to this Message

Moonbat - 17 Mar 2008 19:03 GMT

>> [This followup was posted to alt.autos.dodge and a copy was sent to the
>> cited author.]
[quoted text clipped - 18 lines]
> necessarily
> any better than, or as good as, good aftermarket parts.

What are *YOU* doing *HERE*?

Reply to this Message

Hachiroku ハチロク - 17 Mar 2008 19:04 GMT

>> [This followup was posted to alt.autos.dodge and a copy was sent to the
>> cited author.]
[quoted text clipped - 18 lines]
> necessarily
> any better than, or as good as, good aftermarket parts.

HTF did I end up as "Moonbat"?????

Reply to this Message