 |
 | Home | Contact Us | FAQ | Search & Site Map | Link to Us |
 | Sign In | Join | Other 45 Sites in Network |
Car Forum / Ford / Ford Explorer / December 200496 Explorer remote program help
My only remote with a set of fresh batteries will not unlock/lock. Does anyone know how to program it to work?? John > My only remote with a set of fresh batteries will not unlock/lock. Does > anyone know how to program it to work?? John Turn ignition from Off to Run 5 times within 10 seconds, ending in RUN. All doors will lock and unlock to confirm programming mode. Within 20 seconds, press any button on the remote. Door locks will cycle to confirm programming.Within 20 seconds, press any button on the 2nd remote (up to 4 can be programmed). Turn ignition OFF. Locks will cycle to confirm end of programming. Note: The Ford TSB I have says that there is no need to reprogram a remote after battery replacement. Maybe you got bad batteries or they are not in correctly or not making good contact? Good luck, Red |
Reply to this Message |
 Sign In
 Join
 My Latest Posts My Monitored Threads My Blog My Photo Gallery My Profile My Homepage Start New Thread Enable EMail Alerts Rate this Thread
|
©2008 Advenet LLC Privacy Policy - Terms of Use
This website includes both content owned or controlled by Advenet as well as content owned or controlled by third parties.