 |
 | Home | Contact Us | FAQ | Search & Site Map | Link to Us |
 | Sign In | Join | Other 45 Sites in Network |
Car Forum / Ford / Ford Explorer / February 2005Spindle Question
Bearing noise from front drivers side 97 Explorer 2WD. Replaced bearings and rotor. Testing rotor on installation and hear noise. Notice slight markings on ABS wheel sensor. Torqued to lowest recommended setting but exciter ring still brushes sensor. Appears spindle has worn and allowed exciter ring to brush against sensor. Any suggestions short of replacing spindle? If the spindle is worn or bent enough for the sensor to touch the tone ring, there is only one logical conclusion. > Bearing noise from front drivers side 97 Explorer 2WD. Replaced bearings > and rotor. Testing rotor on installation and hear noise. Notice slight [quoted text clipped - 4 lines] > > Any suggestions short of replacing spindle? |
Reply to this Message |
 Sign In
 Join
 My Latest Posts My Monitored Threads My Blog My Photo Gallery My Profile My Homepage Start New Thread Enable EMail Alerts Rate this Thread
|
©2008 Advenet LLC Privacy Policy - Terms of Use
This website includes both content owned or controlled by Advenet as well as content owned or controlled by third parties.