Home | Contact Us | FAQ | Search & Site Map | Link to Us
Sign In | Join | Other 45 Sites in Network
HomeAnnouncements
Discussion Groups
By Brand
BMWChevroletDodgeFordGMHondaLexusMercedes-BenzNissanPeugeotToyotaVolkswagenOther Brands
By Topic
4x4 CarsRVsDrivingMaintenance & RepairCar AudioCollectible Cars
Country Specific
Australian ForumsUK Forums
ArticlesAuto InsuranceBuyingCars & TechnologyMaintenanceMiscellaneousSafety
DMV Resources
Related Topics
MotorcyclesBoatsMore Topics ...

Car Forum / Ford / Ford Explorer / April 2005

Tip: Looking for answers? Try searching our database.

1998 explorer 4.0 sohc

Thread view: 
Enable EMail Alerts  Start New Thread
Thread rating: 
fish - 21 Apr 2005 09:18 GMT
My spark plugs have black powder on them, I was told either ruuning to rich
or something in ignition system, has alot of hesitation, and cappy gas
milage. What does the ignition system include? Thanks
Jim Warman - 22 Apr 2005 01:41 GMT
Ignition system includes plugs, wires and coils n the secondary side.... ICM
and PCM on the primary side. My first inclination would be to fuel system
faults for what you describe but, there's not much info to go on..... Miles
on the car, how long since last tune/air filter/fuel fiilter and so on? Is
the CEL on, even if it's not, are there any codes? Where are the fuel trims
sitting? Are there any other running symptoms besides bad mileage?

> My spark plugs have black powder on them, I was told either ruuning to rich
> or something in ignition system, has alot of hesitation, and cappy gas
> milage. What does the ignition system include? Thanks
fish - 22 Apr 2005 16:13 GMT
Hey Jim,It was remanufactured about 1000 miles ago, it has run rough since
then.I had one side or the catalytic converter replaced, think the otger
side needs replacing also. At the shpo where replaced the cat converter,
they scanned it and showed mass air flow sensor. I f replaced it, and then
it showed codes oxegine sensors 1 side to rich the other side to lean. Had
sensors replaced when they redid motor.I don't know if wires or coil have
ever been replaced. It had 129000 miles when motor in was replaced. The
hydrolic tensoners were bad. But it was running a little like this before
motor was replaced. Now it hesitates, and runs rough at idle, you have to
really push on gas to get it going. any help would be appreciated.
Jim Warman - 24 Apr 2005 07:55 GMT
If this stuff has surfaced since the mtor replacement, I would first go over
any and all connections between motor and chassis. It's amazing what a bad
ground or improperly assigned vacuum line can do. If your shop is struggling
with their diagnosis, it may be time to find a different shop....

> Hey Jim,It was remanufactured about 1000 miles ago, it has run rough since
> then.I had one side or the catalytic converter replaced, think the otger
[quoted text clipped - 6 lines]
> motor was replaced. Now it hesitates, and runs rough at idle, you have to
> really push on gas to get it going. any help would be appreciated.

Rate this thread:






 
Sign In
Join
My Latest Posts
My Monitored Threads
My Blog
My Photo Gallery
My Profile
My Homepage

Start New Thread
Enable EMail Alerts
Rate this Thread



©2008 Advenet LLC   Privacy Policy - Terms of Use
This website includes both content owned or controlled by Advenet as well as content owned or controlled by third parties.