Jim, I doubt that WD40 contains silicon (which is "sand"). I do not even
think it contains "silicone" which may be what you are trying to say, unless
it is unlabeled as such.
Steve
> NO!!!!! WD40 contains silicon... this is bad kharma for O2 sensors....
>
[quoted text clipped - 4 lines]
>> engine you have. I think it might be in the same location for the other
>> engines, but I'm not sure.
Here's what WD-40 website says. look where it says "What does WD-40
contain?"
http://www.wd40.com/Brands/wd40_faqs.html
In light of mike's post, I stand corrected... however, we should tread
carefully on grammar and such at times... A good portion of the world spells
"colour" incorrectly as well as neighbour and endeavour..... I'll dig into
my roots and also suggest that even more don't know how to spell tyre and
gaol (tire and jail for the colonists).
Besides, I do pretty good for a grade 8 drop-out.. 8^)
> Jim, I doubt that WD40 contains silicon (which is "sand"). I do not even
> think it contains "silicone" which may be what you are trying to say, unless
[quoted text clipped - 9 lines]
> >> engine you have. I think it might be in the same location for the other
> >> engines, but I'm not sure.
Simon H - 09 Oct 2005 02:18 GMT
> In light of mike's post, I stand corrected... however, we should tread
> carefully on grammar and such at times... A good portion of the world
[quoted text clipped - 4 lines]
>
> Besides, I do pretty good for a grade 8 drop-out.. 8^)
Dunno what grade 8 is but how did they manage to spell "disc" as "rotor",
or "wing" as "fender", or "tap" as "Faucet", or "arse" as "fanny", or
"spanner" as "wrench", or "aluminium" as "aluminum", etc, etc, etc.
It's a funny ol' world...
Simon H
;-) ;-) ;-)
Ratbert - 09 Oct 2005 02:22 GMT
> In light of mike's post, I stand corrected... however, we should tread
> carefully on grammar and such at times... A good portion of the world spells
> "colour" incorrectly as well as neighbour and endeavour..... I'll dig into
> my roots and also suggest that even more don't know how to spell tyre and
> gaol (tire and jail for the colonists).
You forget that both silicon and silicone are real words, and that they
mean different things.
Happy Traveler - 09 Oct 2005 09:22 GMT
Silicon is an element, atomic weight 14. In its crystalline and highly
purified form it's the stuff that computer chips are made of.
Siicone is a semi-organic polymer. Among other uses, its physiological
inertness and physical properties made it a good candidate for augmenting
some body parts -- until we learned better.
So it's not a question of spelling, but of chemistry at this time. Yet I
have no clue how we got into this debate. Does any of the two have anything
to do with Explorers?
> In light of mike's post, I stand corrected... however, we should tread
> carefully on grammar and such at times... A good portion of the world spells
> "colour" incorrectly as well as neighbour and endeavour
Mikepier - 10 Oct 2005 13:46 GMT
> So it's not a question of spelling, but of chemistry at this time. Yet I
> have no clue how we got into this debate. Does any of the two have anything
> to do with Explorers?
I don't know, but all that matters is the original poster got his car
started.
I had the same thing happened 4 weeks after I bought my 2001 Explorer. It
failed to start at lunch time. It would turn over, and only start if I
hit the gas, then it would shut off if I let off the peddle. I called the
dealer and told them I had seen posts from searching around that it could
be the IAC sensor. They towed it and replaced that, and it's worked fine
every since. Now, a week later, I am getting a TIC from the motor when I
turn on the Heat. Every 5-8 seconds it tics and the rpm's drop about 200
rpm. Any lower and it would stall. I posted about it in a simliar topic
already posted. Any ideas, let me know.
Mikepier - 21 Oct 2005 18:30 GMT
It sounds like the A/C compressor is cycling, which is what it's
suppose to do if you are using your defroster, but for regular heat
it's not suppose to cycle, at least in my 99 XLT, unless they changed
it for 2001. Are you using the floor heat only?