 |
 | Home | Contact Us | FAQ | Search & Site Map | Link to Us |
 | Sign In | Join | Other 45 Sites in Network |
Car Forum / Ford / Ford Explorer / February 2006explorer
need help have a 95 explorer limited and the lamp outage module burned . this module is located under consule and is for the diagnostic display on consule. now the tail,brake,headlights,parking lamps not working only in the back. can I cut the plug for this module and bypass the wires need wiring diagram to see what wirs are for what on that plug so I can connect the wiers to bypass. HELP Had similar problem with my 95EB. Somewhere on the net, I got a picture of the LOM and some guy gave directions for soldering it. The board is pretty simple and I could see the break in solder between points, once I knew what to look for. My left headlight was out before the repair. I had a tech guy at work re-solder the joint (very small area, so I left it to a pro). Otherwise search Ebay for a LOM (saw a few 2 years ago). I wouldn't try to just eliminate it. Ted |
Reply to this Message |
 Sign In
 Join
 My Latest Posts My Monitored Threads My Blog My Photo Gallery My Profile My Homepage Start New Thread Enable EMail Alerts Rate this Thread
|
©2008 Advenet LLC Privacy Policy - Terms of Use
This website includes both content owned or controlled by Advenet as well as content owned or controlled by third parties.