Home | Contact Us | FAQ | Search & Site Map | Link to Us
Sign In | Join | Other 45 Sites in Network
HomeAnnouncements
Discussion Groups
By Brand
BMWChevroletDodgeFordGMHondaLexusMercedes-BenzNissanPeugeotToyotaVolkswagenOther Brands
By Topic
4x4 CarsRVsDrivingMaintenance & RepairCar AudioCollectible Cars
Country Specific
Australian ForumsUK Forums
ArticlesAuto InsuranceBuyingCars & TechnologyMaintenanceMiscellaneousSafety
DMV Resources
Related Topics
MotorcyclesBoatsMore Topics ...

Car Forum / Ford / Ford Explorer / March 2007

Tip: Looking for answers? Try searching our database.

HELP

Thread view: 
Enable EMail Alerts  Start New Thread
Thread rating: 
bigwaverider - 26 Mar 2007 03:52 GMT
This is the deal. I had the emergency brake on  on my truck because my
driveway has a slant to it. I went to go and leave so I released the
emergency brake and then turned my car on. I then put the car in reverse
so that I could leave. The truck wouldn't move. I tried it in drive. The
truck wouldn't move. I put it in neutral and it still wouldn't go
anywhere. The speedomoter wouldn't even move. What do I do? I need answers
quick.
Happy Traveler - 26 Mar 2007 04:16 GMT
Well, if you need answers quick, perhaps you can provide some details: what
kind of truck it is, year, mileage, engine size, automatic or manual, 2 or 4
wheel drive? You know, the basics...

The speedomoter wouldn't even move. What do I do? I need answer quick.
Ulysses - 26 Mar 2007 18:29 GMT
> This is the deal. I had the emergency brake on  on my truck because my
> driveway has a slant to it. I went to go and leave so I released the
[quoted text clipped - 3 lines]
> anywhere. The speedomoter wouldn't even move. What do I do? I need answers
> quick.

If it's an automatic transmission I'd try pushing it forward a little.  The
trans may have locked up.  I always put mine in gear before releasing the
parking brake.
Ron & Maggie - 26 Mar 2007 23:43 GMT
Sounds as if your emergency brake cable is rusted and frozen in place.
Try a little diesel fuel, WD40 or any other type of low visc solvent on
your cables, one on each side connected to the backing plate of the rear
brake. Apply than reapply your parking brake tell they are free. If this
fails you may have to remove the rear wheels, not 100% necessary, than
use vice grips or what ever works to free up your rusted cables. At some
point you will need to replace those rusted cables.

Good luck,

Ron

> This is the deal. I had the emergency brake on  on my truck because my
> driveway has a slant to it. I went to go and leave so I released the
[quoted text clipped - 3 lines]
> anywhere. The speedomoter wouldn't even move. What do I do? I need answers
> quick.
Trefor - 27 Mar 2007 10:44 GMT
Good advice, but be VERY careful if you jack the truck up on a steep
driveway.
Make sure all wheels that remain on the ground are securely chocked with
wooden blocks or similar.
Try not to lift both back wheels at the same time, Seems obvious I know, but
it has been known for experienced home mechanics to overlook the fact that
the handbrake will not be effective if both rear wheels are off the ground

Trefor

> Sounds as if your emergency brake cable is rusted and frozen in place. Try
> a little diesel fuel, WD40 or any other type of low visc solvent on your
[quoted text clipped - 7 lines]
>
> Ron
Darby - 27 Mar 2007 19:14 GMT
> Good advice, but be VERY careful if you jack the truck up on a steep
> driveway.
[quoted text clipped - 18 lines]
>>
>> Ron

This would have been good info two days ago when he posted in a big hurry.
The guys probably dead by now. Trapped under his  own back wheels in his
nice steep driveway. LOL
Trefor - 27 Mar 2007 22:14 GMT
I bet you're a riot at parties Darby
ROFL

Trefor

> This would have been good info two days ago when he posted in a big hurry.
> The guys probably dead by now. Trapped under his  own back wheels in his
> nice steep driveway. LOL

Rate this thread:






 
Sign In
Join
My Latest Posts
My Monitored Threads
My Blog
My Photo Gallery
My Profile
My Homepage

Start New Thread
Enable EMail Alerts
Rate this Thread



©2008 Advenet LLC   Privacy Policy - Terms of Use
This website includes both content owned or controlled by Advenet as well as content owned or controlled by third parties.