1993 firing problem. I need HELP

Thread view:

Enable EMail Alerts

Start New Thread

Thread rating:

dferdon - 30 May 2008 09:03 GMT

I have a 1993, 5 spd. ,4.0 that will turn over but not start. for a whil
I
was able to bump the selenoid and provided there was fire from the plug
wire to the coil pack, it would crank up. When that no longer worked and
there was no fire to the coil,I replaced the coil pack. It cranked u
once.
The second time I tried to take off in it , it acted the same way. Tur
over
but not fire up. Plenty of gas, New fuel pump and filter, new plugs and
wires, timing chain okay just no fire. Does anyone know whats going on
with this thing? I'm truely beginning to believe my truck is possessed!!!
Help !!

-
Message posted using http://www.talkaboutautos.com/group/rec.autos.makers.ford.explorer
More information at http://www.talkaboutautos.com/faq.htm

Reply to this Message

Bob - 30 May 2008 20:51 GMT

> I have a 1993, 5 spd. ,4.0 that will turn over but not start. for a while
> I
[quoted text clipped - 12 lines]
> Message posted using http://www.talkaboutautos.com/group/rec.autos.makers.ford.explorer/
> More information at http://www.talkaboutautos.com/faq.html

Check the fuel pump relay. To trouble shoot it, replace it temporarily
with the blower relay, they are the same.

Reply to this Message

dferdon - 31 May 2008 03:28 GMT

my fuel system was the first thing I checked. I made that mistake not to
long ago. I went round and round thinking my problem was electrical.
really learned my lesson that time. Thanks tho, Checking it again surle
couldnt hur

-
Message posted using http://www.talkaboutautos.com/group/rec.autos.makers.ford.explorer
More information at http://www.talkaboutautos.com/faq.htm

Reply to this Message