I had at it again on the front rotors on my 99 xlt sohc 4wd. 55,000 miles
These are not budging at all! I tried soaking them for days with liquid
wrench, heating them with a torch, pounding with a ballpeen hammer
all with no luck.
Does anyone have any suggestions for one last shot before I cave in and
bring the car in to a shop.
I really hate paying for a job that I should be able to do with no problems
;o(
Katmandu - 25 Oct 2003 16:43 GMT
Sounds like the Master Cylinder is shot.

Signature
ERIC
> I had at it again on the front rotors on my 99 xlt sohc 4wd. 55,000 miles
>
[quoted text clipped - 7 lines]
> I really hate paying for a job that I should be able to do with no problems
> ;o(
Steven Hilgendorf - 25 Oct 2003 17:52 GMT
> I had at it again on the front rotors on my 99 xlt sohc 4wd. 55,000 miles
>
[quoted text clipped - 7 lines]
> I really hate paying for a job that I should be able to do with no problems
> ;o(
Louis, keep trying. The shop does not have a magical tool to remove the
rotors. Try a different catalyst, like PB Blaster (
http://www.pbblaster.com ). Once they crack loose you are going to be
surprised at how small an area of surface rust gave you such a hard time
:o)
Good luck,
Steven
none - 02 Jul 2005 03:12 GMT
> I had at it again on the front rotors on my 99 xlt sohc 4wd. 55,000 miles
>
[quoted text clipped - 7 lines]
> I really hate paying for a job that I should be able to do with no problems
> ;o(
Loosen the Lug nuts a little bit and Jam on the brakes hard this should
free the rotors up.