EF falcon sedan fuel pump assembly removal

Thread view:

Enable EMail Alerts

Start New Thread

Thread rating:

Kevin P Mattsson - 13 Dec 2003 04:32 GMT

Can anyone tell us how to remove the large "finned" plastic ring?

Can't tell if it should screw off, bayonet, or clip off, don't want to break
anything.

Any help and tips re: changing pump appreciated.

Kevin

Reply to this Message

Brenden Will - 14 Dec 2003 03:43 GMT

You have to undo the big hose clamp and unscrew the cap. To do the same job,
I used a big flat blade screw driver and hammer. I knocked it slowly round
as I couldn't remove it via hand.

Brenden

> Can anyone tell us how to remove the large "finned" plastic ring?
>
[quoted text clipped - 4 lines]
>
> Kevin

Reply to this Message

George W. Frost - 15 Dec 2003 00:00 GMT

Dont use a screwdriver, you will only knock the fins off, use a piece of
wood instead or the tool for the job.

> You have to undo the big hose clamp and unscrew the cap. To do the same job,
> I used a big flat blade screw driver and hammer. I knocked it slowly round
[quoted text clipped - 11 lines]
> >
> > Kevin

Reply to this Message

Brenden Will - 17 Dec 2003 12:34 GMT

Only if your rough. Mine are all still intact.

Brenden

> Dont use a screwdriver, you will only knock the fins off, use a piece of
> wood instead or the tool for the job.
[quoted text clipped - 15 lines]
> > >
> > > Kevin

Reply to this Message

aussieblu - 14 Dec 2003 06:15 GMT

Screws off using two large screwdrivers or a special tool made
for that purpose.

Signature

Regards
Blue

Remove Z from email address to reply directly.

Reply to this Message

Rate this thread: