The old '79 LTD has started squeaking over bumps and the like. I sprayed
silicone on the shock-rams thru the upper shock mounts (under-bonnet) and
no-go. Any ideas?
Jason
Have you checked for cracking or scaffing on your polyutherene rubber
bushings on your front end. Also could be rear shockies, but i would be
changing some or all of your poly rubbers on front end. My old XY had the
same problem and it was damn annoying.
Hope this helps
Peter
> The old '79 LTD has started squeaking over bumps and the like. I sprayed
> silicone on the shock-rams thru the upper shock mounts (under-bonnet) and
> no-go. Any ideas?
>
> Jason
Jason James - 03 Jun 2004 13:50 GMT
> Have you checked for cracking or scaffing on your polyutherene rubber
> bushings on your front end. Also could be rear shockies, but i would be
[quoted text clipped - 4 lines]
>
> Peter
Makes sense,..it started when we had that hot spell Jan-Feb.
Jason
>The old '79 LTD has started squeaking over bumps and the like. I sprayed
>silicone on the shock-rams thru the upper shock mounts (under-bonnet) and
>no-go. Any ideas?
See if you can grease the upper ball joint although I think later
models were sealed. Could also be the upper A arm pivot points, again
you could grease them but pretty sure later models were sealed.
I'm betting on the upper balljoint if its the common Falcon front end
squeaking sound.
Noddy - 03 Jun 2004 03:44 GMT
"Kieron" <kieronm302@hotmail.com> wrote in message
> I'm betting on the upper balljoint if its the common Falcon front end
> squeaking sound.
If it *is* the usual Falcon front end squeak, then it's actually coming from
either the spring seat bushes on the top arm, or the top arm pivot bushes
themselves.
There's no easy fix I'm afraid, other than drenching the bushes in CRC.
Silicone spray can work too, but it doesn't penetrate as well as CRC does...
--
Regards,
Noddy.
Jason James - 03 Jun 2004 13:55 GMT
> "Kieron" <kieronm302@hotmail.com> wrote in message
>
[quoted text clipped - 11 lines]
> Regards,
> Noddy.
Time to jack-up the front end,...withthat big heavy 8!
Jason
Jason James - 03 Jun 2004 13:52 GMT
> >The old '79 LTD has started squeaking over bumps and the like. I sprayed
> >silicone on the shock-rams thru the upper shock mounts (under-bonnet) and
[quoted text clipped - 6 lines]
> I'm betting on the upper balljoint if its the common Falcon front end
> squeaking sound.
Its the common one allright and its very annoying. Never thought of the
ball-joints (they are sealed). Can install a nipple by prising out the plug
I read somewhere.
Jason