 |
 | Home | Contact Us | FAQ | Search & Site Map | Link to Us |
 | Sign In | Join | Other 45 Sites in Network |
Car Forum / Ford / Ford Falcon / March 2006AU 2 LPG only won't start
I have an AU 2 LPG only (factory fitted) that won't start. It has new plugs, leads, etc. It will kick after a few seconds turning over then seems to flood (I smell gas). If I disconnect the cable from the top of the mixer (I suspect it's the shutoff solenoid cable) then the car will fire. I can sometimes get it started by plugging the cable back in at that point. Does anyone have any clues? Thanks, Rob I suspect the idle jet is clogged (common problem) Unbolt the solenoid at the top of the convertor, then remove the 17mm bolt & the idle jet sits inside the hole (need a spark plug tip and a screw to get it out). You'll need a file and some CRC to clean it out. That should fix the problem, or perhaps a solenoid has also died. -- Regards Bobby
|
Reply to this Message |
 Sign In
 Join
 My Latest Posts My Monitored Threads My Blog My Photo Gallery My Profile My Homepage Start New Thread Enable EMail Alerts Rate this Thread
|
©2008 Advenet LLC Privacy Policy - Terms of Use
This website includes both content owned or controlled by Advenet as well as content owned or controlled by third parties.