Problem with my EF Falcon?

Thread view:

Enable EMail Alerts

Start New Thread

Thread rating:

themadhouse001@bigpond.com - 01 Oct 2007 05:24 GMT

Problem with my EF Falcon?
Hi all
I have a 95 model ford falcon EF.
I have replaced the crank angle sensor twice and still every time the
car gets hot it will not start. The only way to get it to start when
it is hot is to pour cold water on and around the crank angle sensor.
On Saturday it starting affecting the transmission. When the car gets
hot now I lose all gears including reverse. Then if I pour water over
the crank angle sensor it works again until the motor gets hot again.
Please help.

Reply to this Message

aussiblu - 01 Oct 2007 13:30 GMT

Is the pick-up magnet that trips the crank angle sensor Ok? Is
the running at normal temp or overheating?

Signature

Regards
Blue

Remove ZX from email address to reply directly.

Reply to this Message

TPr - 11 Oct 2007 00:14 GMT

is the ECU holding any codes ?

Its what I would be checking - and if its referring to a faulty crank angle
sensor signal, and after changing it twice, id be looking at checking the
electrical connection to the sensor - since clearly it starts working when
it cools down...

| Problem with my EF Falcon?
| Hi all
[quoted text clipped - 6 lines]
| the crank angle sensor it works again until the motor gets hot again.
| Please help.

Reply to this Message