5.0 EFI manifold question

Thread view:

Enable EMail Alerts

Start New Thread

Thread rating:

Tina Pedro - 01 Aug 2003 06:36 GMT

I came across(at a junkyard)an older,Im guessing,5.0 upper intake
manifold.Im never seen one like this one.I was wondering if someone here
could give me little info on it.The decription goes like this:basic 5.0
manifold except the vauum ports appear to be on the top-side and thiere
is 2 throttlebodies.On top it reads 5.0 EFI.It looks like it would bolt
on to the 87-93 types.Is this any better than the stock ones and whats
up w/the twin throttlebodies.Any input is appreicated.

Reply to this Message

Musttanguy - 01 Aug 2003 08:13 GMT

>From: traytroy

>I came across(at a junkyard)an older,Im >guessing,5.0 upper intake manifold.
>The vauum ports appear to be on the >top-side and there is 2 throttlebodies.

Sounds like the upper intake to an 86-96 EFI 5.0/5.8 truck/van motor. The 5.8
(351) looks similiar but says 5.8 EFI. Both have the twin butterfly throttle
bodies

TIM -aka-
MUSTTANGUY@AOL.COM
http://www.PonyPerformance.com

Reply to this Message

Serge - 01 Aug 2003 14:39 GMT

Correct me if I am wrong but I don't think they fit under the stock hood...I
would grab it for the lower...

2 cents.

Serge

> >From: traytroy
>
[quoted text clipped - 8 lines]
> MUSTTANGUY@AOL.COM
> http://www.PonyPerformance.com

Reply to this Message

Katmandu - 01 Aug 2003 17:15 GMT

Yea, it's a truck manifold.

I was looking under the hood of a 87 F150 this AM and was noticing the
differences as well.

Signature

ERIC

89 5.0 LX Vert
64 Falcon HT Hot Rod Project

Check out the Ford Engine Heaven!
http://users.boardnation.com/~katmandu/index.php

> I came across(at a junkyard)an older,Im guessing,5.0 upper intake
> manifold.Im never seen one like this one.I was wondering if someone here
[quoted text clipped - 3 lines]
> on to the 87-93 types.Is this any better than the stock ones and whats
> up w/the twin throttlebodies.Any input is appreicated.

Reply to this Message