Which Version of Ford EEC do I have

Thread view:

Enable EMail Alerts

Start New Thread

Thread rating:

Loops - 16 Aug 2004 23:20 GMT

Hello,

'95 Mustang GT. 302cu inch, 5spd. 42,000 miles. I have a few
questions which I have not been able to find a concise answer to.

1) Which version of Ford's EEC do I have EEC-IV or EEC-5
2) Do I have ODB-I or ODB-II
3) Who manufactures a good code reader easily used by a novice
4) Where do I find a list of codes. I've found many on the internet.
None were consistant. Hopefully, the code reader would come with a
list.

Thank you,

Loops

Reply to this Message

WraithCobra - 17 Aug 2004 00:49 GMT

I believe it's the EEC-IV which is OBD-I, and the '96+ 4.6L use the EEC-V
which is OBD-II. While a code reader is nice, it is not needed to pull codes
and run diagnostics on the EEC-IV. Here's a page that shows how;
http://www.dalidesign.com/hbook/eectest.html

Signature

Mike
Silver 10th Anniversary Cobra Coupe
---

> Hello,
>
[quoted text clipped - 11 lines]
>
> Loops

Reply to this Message

WhyteStang - 17 Aug 2004 09:10 GMT

>1) Which version of Ford's EEC do I have EEC-IV or EEC-5

You should have the EEC-IV, ODB-1.

>3) Who manufactures a good code reader easily used by a novice

Dont remember the brand, but you can pick up a decent one at your local
Discount Auto Parts, Autozone, etc for $20 or so.

>4) Where do I find a list of codes. I've found many on the internet.
> None were consistant. Hopefully, the code reader would come with a
>list.

Yeah the code reader will come with a list of codes. The Corral used to have a
database but I dont see it anymore.

-Franklin
'96 Cobra

Reply to this Message