1970 mustang

Thread view:

Enable EMail Alerts

Start New Thread

Thread rating:

Cecilc33 - 29 Sep 2004 04:30 GMT

looking at a 1970 mustang coupe.
floorpan on drivers side is shot
a little rust in the doors
a strong running 302 / 2barrel
a newly rebuilt c4 auto
windows need to be reglued
im in south georgia
any ideas as to price on this ?
thanks
cecil

Reply to this Message

Stuart&Janet - 29 Sep 2004 04:38 GMT

Which windows need regluing? 1970's used bolt on side windows. '69's had glue in windows.
I'd be looking real close that this thing isn't a hack job of a few cars. Check for cowl
leaks if the floors are bad too. What's the VIN? StuK

> looking at a 1970 mustang coupe.
> floorpan on drivers side is shot
[quoted text clipped - 6 lines]
> thanks
> cecil

Reply to this Message

Cecilc33 - 29 Sep 2004 05:33 GMT

vin is 0t01f101356

Reply to this Message

Stuart&Janet - 29 Sep 2004 06:06 GMT

Well it's a '70 VIN. With such a low consecutive #, 1356 I'm wondering if '69 style doors
were used. It was probably built the first week of production in the Metuchen plant so
they may have been using what they had. Hmmm interesting... Check that cowl! StuK

> vin is 0t01f101356

Reply to this Message

66 6F HCS - 29 Sep 2004 07:46 GMT

> windows need to be reglued

'70 windows are bolt in, not glue in. You sure it's not a '69?

Signature

Scott W.
'66 Mustang HCS 289
'68 Ranchero 500 302
'69 Mustang Sportsroof 351W
'97 Cougar 30th Anniv SE 4.6L
ThunderSnake #57
http://home.comcast.net/~scott.williams.613/

Reply to this Message

Merc - 29 Sep 2004 16:59 GMT

I would stay away from rustbuckets - you will invest more $$ in the car than
you would if you bought a rust free unit. Nice rust free drivers can be had
for $7500-12000.

> > windows need to be reglued
>
[quoted text clipped - 7 lines]
> ThunderSnake #57
> http://home.comcast.net/~scott.williams.613/

Reply to this Message