1998 Ford Mustang GT Engine Block Drain Plug Or Plugs

Thread view:

Enable EMail Alerts

Start New Thread

Thread rating:

Buford T. Justice - 03 May 2005 23:30 GMT

Where could I find the 2 engine block drain plugs at (assuming there are 2)?
I thought I found one under a freeze plug that had a 5/8" head on it, but I
thought the drain plugs were more like the one on the differential. Might
someone enlighten me as to where the engine block drain plug or plugs are
and how to remove them? Maybe even provide a link to pictures of a 4.6
showing where they are and what they look like?

Thanks In Advance,
BTJustice

Reply to this Message

sanfordm44356@syahoo.com - 03 May 2005 23:42 GMT

>Where could I find the 2 engine block drain plugs at (assuming there are 2)?
>I thought I found one under a freeze plug that had a 5/8" head on it, but I
[quoted text clipped - 5 lines]
>Thanks In Advance,
>BTJustice

easily available
located side of block
would replace them all
if your asking these questions
the job is beyond you
and if they popped
your engine is prolly focked
you tard

hurc ast

Reply to this Message

Buford T. Justice - 03 May 2005 23:43 GMT

O...K... Sparky!

> easily available
> located side of block
[quoted text clipped - 6 lines]
>
> hurc ast

Reply to this Message

Buford T. Justice - 03 May 2005 23:54 GMT

I thought they were suppose to have a green stripe on them right?

> Where could I find the 2 engine block drain plugs at (assuming there are
> 2)? I thought I found one under a freeze plug that had a 5/8" head on it,
[quoted text clipped - 5 lines]
> Thanks In Advance,
> BTJustice

Reply to this Message

Buford T. Justice - 06 May 2005 00:52 GMT

http://mywebpages.comcast.net/mrburns/images/coolantdrainplug.jpg

Reply to this Message