Home | Contact Us | FAQ | Search & Site Map | Link to Us
Sign In | Join | Other 45 Sites in Network
HomeAnnouncements
Discussion Groups
By Brand
BMWChevroletDodgeFordGMHondaLexusMercedes-BenzNissanPeugeotToyotaVolkswagenOther Brands
By Topic
4x4 CarsRVsDrivingMaintenance & RepairCar AudioCollectible Cars
Country Specific
Australian ForumsUK Forums
ArticlesAuto InsuranceBuyingCars & TechnologyMaintenanceMiscellaneousSafety
DMV Resources
Related Topics
MotorcyclesBoatsMore Topics ...

Car Forum / Ford / Ford Mustang / July 2005

Tip: Looking for answers? Try searching our database.

vents blow alr out the defrost and florr

Thread view: 
Enable EMail Alerts  Start New Thread
Thread rating: 
richard - 20 Jun 2005 17:14 GMT
I have a 1995 mustang v6 the air con works but about two weeks ago it
started to only come out the defrost and floorboard it doen't matter what
the control is set on any suggestions
Rick
fomococo@hotmail.com - 20 Jun 2005 23:40 GMT
>I have a 1995 mustang v6 the air con works but about two weeks ago it
>started to only come out the defrost and floorboard it doen't matter what
>the control is set on any suggestions
>Rick

replacr the blend door
LMFAO
h
u
r
c
a
s
t
Brian - 21 Jun 2005 01:25 GMT
>>I have a 1995 mustang v6 the air con works but about two weeks ago it
>>started to only come out the defrost and floorboard it doen't matter what
[quoted text clipped - 10 lines]
> s
> t

Yes! "Replacr" it immediately!
D.K.R. - 21 Jun 2005 01:40 GMT
If I wanted to see the moron's posts I wouldn't have him blocked. It's
clear that to avoid the troll I must also filter Brian. Plonk
Musttanguy - 21 Jun 2005 00:31 GMT
Check the small black hard plastic tube that runs along the back of the

firewall from the heater fittings to the vacuum "T" next to the brake
booster. It is VERY common for this vacuum line to get brittle and
break. Without vacuum the vents will default to the defrost position at

the windshield. If broken place a piece of small vacuum hose between
the break. If broken at rubber fitting on the end where it goes to the
"T", drill it out and reinsert tube back into rubber and super glue.

Hope this is helpful,

TIM (Musttanguy)
PonyPerformance.com
JohnV@nn - 21 Jun 2005 21:36 GMT
Yep, this happened on mine; did what Tim says and it's good as new.

John

> Check the small black hard plastic tube that runs along the back of the
>
[quoted text clipped - 10 lines]
> TIM (Musttanguy)
> PonyPerformance.com
C - 21 Jun 2005 17:58 GMT
rstopka@cox.net (richard) wrote in <UXBte.63149$gc6.2562@okepread04>:

>I have a 1995 mustang v6 the air con works but about two weeks ago it
>started to only come out the defrost and floorboard it doen't matter what
>the control is set on any suggestions
>Rick

I had a simular issue with my 97 v6.  Found a vacumme line in the engine
compartment near the firewall that had become disconnected.  After
reconnecting it all vent modes worked.
Pete Sampogna - 05 Jul 2005 02:04 GMT
vacum leak
>I have a 1995 mustang v6 the air con works but about two weeks ago it
>started to only come out the defrost and floorboard it doen't matter what
>the control is set on any suggestions
> Rick
elaich - 05 Jul 2005 05:50 GMT
"Pete Sampogna" <petebmc@optonline.net> wrote in news:J0lye.9374$SQ1.2662
@fe09.lga:

> vacum leak

My buddy took his '96 Contour in to have the tranny rebuilt, and got it
back doing the same thing. They had broken a small vacuum line off at the
firewall. Look for broken vacuum lines.

Signature

"This space for rent."

 
Sign In
Join
My Latest Posts
My Monitored Threads
My Blog
My Photo Gallery
My Profile
My Homepage

Start New Thread
Enable EMail Alerts
Rate this Thread



©2008 Advenet LLC   Privacy Policy - Terms of Use
This website includes both content owned or controlled by Advenet as well as content owned or controlled by third parties.