pcv connection?

Thread view:

Enable EMail Alerts

Start New Thread

Thread rating:

gcroix - 14 Sep 2005 22:24 GMT

Hey everyone. I'm putting a 93 EFI motor in my 66 Mustang. Question...the
PCV valve that goes into the back of the manifold...does it have two outlets
or one? If it is two, I don't know where they both go. Thanks in advance.
I know if it is just one, it connects into the upper intake, just not sure
where the other pcv connection goes. (I've seen pcv's with one outlet and
some with two, that both say they go on this motor.)

Stumped in Carolina.

Reply to this Message

Jim Warman - 15 Sep 2005 01:58 GMT

Some PC valves come with two vacuum connections but this is so vendors can
reduce stocking part numbers. In you case, the small vacuum connection
should be plugged off (there is usually a plug included in the package for
these applications).

HTH

> Hey everyone. I'm putting a 93 EFI motor in my 66 Mustang. Question...the
> PCV valve that goes into the back of the manifold...does it have two outlets
[quoted text clipped - 4 lines]
>
> Stumped in Carolina.

Reply to this Message

gcroix - 15 Sep 2005 02:41 GMT

Thanks. I'll keep that in mind.

> Some PC valves come with two vacuum connections but this is so vendors can
> reduce stocking part numbers. In you case, the small vacuum connection
[quoted text clipped - 16 lines]
>>
>> Stumped in Carolina.

Reply to this Message