2005 Mustang Fog Light Question

Thread view:

Enable EMail Alerts

Start New Thread

Thread rating:

Craig Shaffer - 17 Jun 2006 20:38 GMT

I installed a GT front bumper, and grill with fog lights on my 6 cyl. 2005
Mustang. In a schematic of the wiring there is a note that if you want the
light on the GT switch to work you have to run a jumper from dk/wh to bg/lg
(?). First Question. On the GT switch does the fog light icon and the word
pull light up? Second Question what colors wires are dk/wh and bg/lg? Final
Question where do you run that jumper? Is it on the switch? The power
distribution box under the hood?

If any one can answer these questions, please explain it to me in simple
terms for a non mechanic. Thank you in advance.

Reply to this Message

Jetter - 20 Jun 2006 21:57 GMT

I just ordered that GT grille kit off of ebay. its supposed to come
with
a 16 page manual. When I get the kit ill take a look and see if it has
a wiring diagram for you. Did you get any docs at all on it? I should
be
able to scan them for you if you need it.

Does your 05 mustang have a pretty nasty brake squeal to it? I replaced
my
disc brakes with some ceramic hawk performance brakes. They were
completly
quiet for about 2000 miles and now there squealing again lol

> I installed a GT front bumper, and grill with fog lights on my 6 cyl. 2005
> Mustang. In a schematic of the wiring there is a note that if you want the
[quoted text clipped - 6 lines]
> If any one can answer these questions, please explain it to me in simple
> terms for a non mechanic. Thank you in advance.

Reply to this Message

Craig Shaffer - 23 Jun 2006 03:18 GMT

Got no documents with the take off's at all just got a page from a news
group, but was at low resolution and hard to read. No break squeal at all.
No problems with the car. Other than to install the GT Bumpers and wheels
the car has needed nothing, had no problems, only wrench the engine has seen
is to change the oil and filter

Reply to this Message

Jetter - 23 Jun 2006 18:24 GMT

I received the manual today. The electrical work looks like its a
pretty
involved upgrade. Doesnt look like much fun trying to do without a
manual
lol. I can scan it up and email it to you if you want it. do you want
it to your
att.net address?

> Got no documents with the take off's at all just got a page from a news
> group, but was at low resolution and hard to read. No break squeal at all.
> No problems with the car. Other than to install the GT Bumpers and wheels
> the car has needed nothing, had no problems, only wrench the engine has seen
> is to change the oil and filter

Reply to this Message