F150 302 stalls whenever I start it. I use a stick to keep it idling.
It stalls when I go from park to reverse, or change any gear, or go
around a sharp corner.
Changed the plugs, the rotor and cap, and muffler.
What do I try next?
meinmntn - 11 Mar 2005 15:18 GMT
1992 truck
also changed
air and fuel filters
j.b. miller - 11 Mar 2005 16:16 GMT
replace ALL fuel filters...???
bobby swift - 12 Mar 2005 01:05 GMT
Vacuum leak?Maybe brake booster leaking?
Bobby
Tyrone - 12 Mar 2005 03:37 GMT
> F150 302 stalls whenever I start it. I use a stick to keep it idling.
>
[quoted text clipped - 4 lines]
>
> What do I try next?
Change the muffler again. <g>
bomar - 12 Mar 2005 13:10 GMT
> > F150 302 stalls whenever I start it. I use a stick to keep it idling.
> >
[quoted text clipped - 6 lines]
>
> Change the muffler again. <g>
Maybe muffler was installed backwards and it's filling the engine with
exhaust.
Take muffler loose, carefully lower to ground, turn truck around and
reinstall muffler.
David M - 12 Mar 2005 13:29 GMT
> F150 302 stalls whenever I start it. I use a stick to keep it idling.
>
[quoted text clipped - 4 lines]
>
> What do I try next?
You should check the length of the stick. Different years used
different sticks.
<g>

Signature
David M (dmacchiarolo)
http://home.triad.rr.com/redsled
T/S 53
sled351 Linux 2.4.18-14 has been up 19 days 10:50
David M - 12 Mar 2005 13:33 GMT
> F150 302 stalls whenever I start it. I use a stick to keep it idling.
>
[quoted text clipped - 4 lines]
>
> What do I try next?
How about reporting what codes have been set? Autozone will
scan it for you for free.

Signature
David M (dmacchiarolo)
http://home.triad.rr.com/redsled
T/S 53
sled351 Linux 2.4.18-14 has been up 19 days 10:53
Mike - 14 Mar 2005 07:17 GMT
Low oil pressure? I had this in my 86 Bronco 302. 1 foot on the brake, and 1
foot on the gas as the song goes. I have heard of several people that had
the same problem with their 302's. Thing died on me with low compression
finally. Keep heavy weight oil like 10w 40 in it.
> F150 302 stalls whenever I start it. I use a stick to keep it idling.
>
[quoted text clipped - 4 lines]
>
> What do I try next?
joemooney@webtv.net - 14 Mar 2005 08:37 GMT
how about the air idle control motor?