I went to get this truck inspected, and the guy asked me to turn on the
high beams. I couldn't for the life of me find the switch!!
Where is it on this model?
Steve Barker - 04 Aug 2005 18:27 GMT
On the floor where they always were until the yuppieization of vehicles.
s
>I went to get this truck inspected, and the guy asked me to turn on the
> high beams. I couldn't for the life of me find the switch!!
>
> Where is it on this model?
CJB - 04 Aug 2005 18:29 GMT
LOL
CJB
> On the floor where they always were until the yuppieization of vehicles.
>
[quoted text clipped - 4 lines]
>>
>> Where is it on this model?
Bunny Boy - 04 Aug 2005 23:51 GMT
Nope. Not there. I guess someone removed it!!
Spdloader - 05 Aug 2005 00:02 GMT
Ummm. Let me guess.
The turn signal stalk, push it and pull it.
?????
Spdloader
> Nope. Not there. I guess someone removed it!!
Steve Barker - 05 Aug 2005 00:08 GMT
It probably rotted off. Does there seem to be a harness down there for it?
And if the low beams work, there must be a connection somewhere.....
s
> Nope. Not there. I guess someone removed it!!
GeoffP - 05 Aug 2005 00:38 GMT
> It probably rotted off. Does there seem to be a harness down there for
> it? And if the low beams work, there must be a connection somewhere.....
[quoted text clipped - 4 lines]
>
>-
My '87 is on the floor waaaay up,
Geoff.
scrape - 05 Aug 2005 11:50 GMT
>Nope. Not there. I guess someone removed it!!
Look behind the parking brake pedal.
lugnut - 05 Aug 2005 13:12 GMT
>I went to get this truck inspected, and the guy asked me to turn on the
>high beams. I couldn't for the life of me find the switch!!
>
>Where is it on this model?
Shouild pull the turn signal stalk toward you to switch
IIRC. Do it again to go back to low. Good thing the SOB
hasn't been stuck on "High"!!
Lugnut
Spdloader - 09 Aug 2005 22:21 GMT
So, where was it?
Spdloader
>I went to get this truck inspected, and the guy asked me to turn on the
> high beams. I couldn't for the life of me find the switch!!
>
> Where is it on this model?
Richard Powers - 21 Aug 2005 19:52 GMT
Pull or push the lever!
> So, where was it?
>
[quoted text clipped - 4 lines]
>>
>> Where is it on this model?
lugnut - 22 Aug 2005 02:46 GMT
There may be a bit of embarrassment here. Hell, I had a '90
model XLT for 2 years before I found out it had intermittent
wipers. The dash did not have the marking for it around the
switch like other XLT's.
Lugnut
>Pull or push the lever!
>
[quoted text clipped - 6 lines]
>>>
>>> Where is it on this model?