 |
 | Home | Contact Us | FAQ | Search & Site Map | Link to Us |
 | Sign In | Join | Other 45 Sites in Network |
Car Forum / Ford / Ford Trucks / October 2005E04D trans compatibility question
Would a E04D from a like year e-150 van fit in a bronco with a failing E04D? Both are 95's As long as it is the same engine block mounting pattern. For example, a 302 or 351W will interchange while a 302 and a 351M will not. Razor > Would a E04D from a like year e-150 van fit in a bronco with a failing > E04D? Both are 95's Thanks Razor...what the difference, or how would one identifiy the M vs. W engines? Thanks 351C/M/400 335 series: 8 bolts in rectangular valve covers. Timing chain housing is part of block. Thermostat housing on block. Exhaust bolt holes diagonal. 351M/400 335 series: intake is 12.7" wide the 351C is narrow. 351W/302/5.0L 6 bolts on trapezoidal valve covers. Thermostat housing on intake. Exhaust bolt holes horizontal. 429/460 385 series: 7 bolts in rectangular valve cover 352/360/390/427/428 FE series: Intake goes under valve covers. There are more specifics but this should tell you which engine family you are in. Razor > Thanks Razor...what the difference, or how would one identifiy the M > vs. W engines? > Thanks You cannot have a 351M or 400 engine in a 1995. They were discontinued in the early 80's. For your application, I think if you have a 302/351 they'll interchange fine since they both have the smaller bell housing. If you have a 460, it's a larger bell housing. I'm thinking the 300 (4.9) is a large bell housing also, like the 460, but it might be the smaller 302/351 housing. Someone else will know. CJB > As long as it is the same engine block mounting pattern. For example, a 302 > or 351W will interchange while a 302 and a 351M will not. [quoted text clipped - 3 lines] > > Would a E04D from a like year e-150 van fit in a bronco with a failing > > E04D? Both are 95's The 300-6 is a small block bell housing. steve > You cannot have a 351M or 400 engine in a 1995. They were discontinued in > the early 80's. For your application, I think if you have a 302/351 [quoted text clipped - 15 lines] >> > Would a E04D from a like year e-150 van fit in a bronco with a failing >> > E04D? Both are 95's I suspected it was, but couldn't remember for sure. Thanks. CJB > The 300-6 is a small block bell housing. > [quoted text clipped - 19 lines] > >> > Would a E04D from a like year e-150 van fit in a bronco with a failing > >> > E04D? Both are 95's >Would a E04D from a like year e-150 van fit in a bronco with a failing >E04D? Both are 95's The Bronco was only available with the Winsor series V8 or the 300 six. Do not know what the van has. It could be anything up to V10. If the van has the 300 six, 5.0L or 5.8L engine, the trans will bolt to the engine with the correct flywheel. The only problem I would predict is that the Bronco is a 4 wheel drive and the van is not likely a 4 wheel drive. That means the tailshaft and housing would have to be changed to work in the Bronco unless you are willing to forego the 4 wheel drive and make a new drive shaft. The rear mount will also be different in some way. IIRC correctly, there was a change in the electronics somewhere along there so, you will need to make sure you have all the same resistance measurements. If you have to change the output shaft which I believe is the case, you may as well rebuild your old one - the whole damn trans has to come apart to do this. Once you've gotten this far, you may as well get a master overhaul kit and rebuild your old one. Lugnut |
Reply to this Message |
 Sign In
 Join
 My Latest Posts My Monitored Threads My Blog My Photo Gallery My Profile My Homepage Start New Thread Enable EMail Alerts Rate this Thread
|
©2008 Advenet LLC Privacy Policy - Terms of Use
This website includes both content owned or controlled by Advenet as well as content owned or controlled by third parties.