Twin I-beam lift

Thread view:

Enable EMail Alerts

Start New Thread

Thread rating:

Larry Anderson - 30 Sep 2006 23:03 GMT

Hello folks,

I'm looking for some info that I saw in a magazine a couple years ago.
It was an aftermarket 4 inch front suspension lift for older F-250 two
wheel drive with twin forged I-beam suspension. The kit came with
I-beams, springs, control arms, and other misc. stuff...... It's for my
70' F-250 2wd.

Thank You for any info.

Cheers,

Lar-Dog>

Reply to this Message

SnoMan - 01 Oct 2006 01:52 GMT

> Hello folks,
>
[quoted text clipped - 9 lines]
>
> Lar-Dog>

No mystery here. It had I beams that had king ping knuckle at a
different angle so that beam could be farther from vehicle (lifted)
and have tire camber at a acceptable angle.
-----------------
TheSnoMan.com

Reply to this Message

Matt Mead - 01 Oct 2006 03:35 GMT

> Hello folks,
>
[quoted text clipped - 9 lines]
>
> Lar-Dog>

Check with Fabtech (www.fabtechmotorsports.com). They have been
pretty involved in 2wd lifts for many years. I didn't see anything on
their site predating about 97, but they may have it or be able to
point you in the right direction.

Matt
99 V-10 Super Duty, Super Cab 4x4

Reply to this Message

FORDification - 01 Oct 2006 14:53 GMT

> Hello folks,
>
[quoted text clipped - 9 lines]
>
> Lar-Dog>

I believe you're looking for Autofab.com. They have pre-runner kits for
the bumpside trucks with a 3" lift:

http://www.autofab.com/65-79.htm

...or a 5" lift:

http://www.autofab.com/5lift.htm

Keith

Signature

FORDification.com - The '67-'72 Ford Pickup Resource
FORDification.com Web Forums - http://www.fordification.com/forum

Life is not a journey to the grave with the intention of arriving safely
in a pretty and well-preserved body, but rather to skid in broadside,
thoroughly used up, totally worn out, and loudly proclaiming--'WOW, what
a ride!!!

Reply to this Message

Larry Anderson - 01 Oct 2006 22:15 GMT

BINGO.!

Thanks guys, that's what I was looking for......

LarDog>

Reply to this Message