Home | Contact Us | FAQ | Search & Site Map | Link to Us
Sign In | Join | Other 45 Sites in Network
HomeAnnouncements
Discussion Groups
By Brand
BMWChevroletDodgeFordGMHondaLexusMercedes-BenzNissanPeugeotToyotaVolkswagenOther Brands
By Topic
4x4 CarsRVsDrivingMaintenance & RepairCar AudioCollectible Cars
Country Specific
Australian ForumsUK Forums
ArticlesAuto InsuranceBuyingCars & TechnologyMaintenanceMiscellaneousSafety
DMV Resources
Related Topics
MotorcyclesBoatsMore Topics ...

Car Forum / Ford / Ford Trucks / December 2006

Tip: Looking for answers? Try searching our database.

1987 f150 abs code #2??

Thread view: 
Enable EMail Alerts  Start New Thread
Thread rating: 
:) :) - 25 Nov 2006 22:01 GMT
I found the RAB connector and grounded it and it gave me one fast flash
and one long code that = code #2.   In the manual it says to unconnect
the 2 ends of the RAB connector and ground out the orange/black stripe
to get antilock light to flash...only problem is my RAB connector was
not connected to anything and was just sitting there unplugged.  Ive
searched and cant find any other plug that would plug into the
orange/black plug end.   Should this connector be plugged to
something..maybe this is why light is on???  Thanks in advance for the
help!! :)Nel
:) :) - 28 Nov 2006 04:08 GMT
Any ideas??
David M - 28 Nov 2006 10:04 GMT
> Any ideas??

Fault code 2 = Open isolation valve circuit or defective ABS module

Signature

David M  (dmacchiarolo)
http://home.triad.rr.com/redsled
T/S 53
sled351 Linux 2.4.18-14  has been up 6 days 19:25

:) :) - 29 Nov 2006 03:49 GMT
Thanks David:)   Any idea where any of these 2 are?  Thanks again:)Nel
David M - 29 Nov 2006 10:53 GMT
> Thanks David:)   Any idea where any of these 2 are?  Thanks again:)Nel

I hope you're kidding.

Isolation valve is near the master cylinder, ABS module is in the
passenger compartment somewhere (varies by vehicle).

Signature

David M  (dmacchiarolo)
http://home.triad.rr.com/redsled
T/S 53
sled351 Linux 2.4.18-14  has been up 7 days 20:13

:) :) - 30 Nov 2006 06:57 GMT
Hello David,   Thanks for help again!!  I will try to find these.  I
wasnt kidding:)...dont know much about cars...but am learning...trying
to anyways:)  Thanks again! :)Nel
David M - 02 Dec 2006 18:59 GMT
> Hello David,   Thanks for help again!!  I will try to find these.  I
> wasnt kidding:)...dont know much about cars...but am learning...trying
> to anyways:)  Thanks again! :)Nel

If you don't know much about cars, you should not be messing around with
your brakes.

Signature

David M  (dmacchiarolo)
http://home.triad.rr.com/redsled
T/S 53
sled351 Linux 2.4.18-14  has been up 11 days 4:20

 
Sign In
Join
My Latest Posts
My Monitored Threads
My Blog
My Photo Gallery
My Profile
My Homepage

Start New Thread
Enable EMail Alerts
Rate this Thread



©2008 Advenet LLC   Privacy Policy - Terms of Use
This website includes both content owned or controlled by Advenet as well as content owned or controlled by third parties.