> Does anyone else out there drive a diesel Ranger?
>
> I've comleted the engine swap from an '83 into my '84 and so far things
> are working well. Does anyone else have one of these trucks or gone to
> such extreme lengths to assemble one? I'm interested to know if there
> are others out there, especially in the maritimes.
it would be sweet if I could. What motor did you swap in, what
transmission? Is this on a 4x4 or 2wd? I would assume some suspension
mods would need to be done for the extra weight of the engine. But
likely no more than for those folks swapping in 5 liter motors and such.
vernon.woolsey@gmail.com - 01 Dec 2006 02:53 GMT
this was a relatively simple and straight forward swap from a rotten
ranger to a solid one. All the bolt wholes pre-drilled to accept the
engine brackets, tranny, accompanying bits, etc. The '83 2wd was the
donor; the solid '84 2wd gasser the recipient:
http://myweb.dal.ca/vr886427/2.2D_Danger_Ranger.JPG
Front springs were swapped aswell. I left the old axles for the taller
gears. The tranny is a 4 speed that was original in the '83. the engine
is the same as what is found in old Mazda diesel P/Us. grossly
underowered but stubbornly reliable and long-lasting engines, i've
learned.
Vernon
> > Does anyone else out there drive a diesel Ranger?
> >
[quoted text clipped - 7 lines]
> mods would need to be done for the extra weight of the engine. But
> likely no more than for those folks swapping in 5 liter motors and such.